Loading Material; Loading Media From Roll; Positioning The Media Roll On The Roll Retainer - Brady BradyPrinter i7100 User Manual

7

Loading Material

i
Note!
For adjustments and simple installation work, use the accompanying Allen key located in the top section of
the print unit. No other tools are required for the work described here.
7.1

Loading Media from Roll

7.1.1

Positioning the Media Roll on the Roll Retainer

10
9
8
7
6
Figure 11 Loading media from roll
1. Open cover (10).
2. Turn ring (2) at the margin stop (1) counterclockwise, so that the arrow points to the symbol
the margin stop.
3. Remove the margin stop (1) from the roll retainer (4).
4. Load label roll (3) on the roll retainer in such a way that the labels can be inserted into the printhead in the right
position. The printing side of the labels must be visible from above.
5. Turn ring (2) clockwise, so that the arrow (10) points to the symbol , and thus fix the margin stop (1) on the roll
retainer (4).
6. Supply longer label strips:
For Peel-Off or Rewind mode: approx. 60 cm
For Tear-Off mode: approx. 40 cm
16
Allen Key
(pull to remove)
1
2
3
4
5
, and thus release
User Manual