Table of Contents
Advertisement
Error Messages (continued):
Displayed Message
"
"
" "
(Continued next page)
78
Description
The printer cannot
detect media.
The printer has
determined that the
media is not
correctly
positioned to print.
The printer has
detected a problem
in the print logic.
The system has
detected a RAM
failure.
Possible Solution(s)
1) Reload media.
2) Ensure that the labels are
passing through the Media
Sensor.
3) Readjust the Media Sensor
over the TOF mark; see
Section 5.1.
4) Calibrate the printer; see
Section 5.3.
Press and hold the FEED key
for 4 seconds; see Section 5.2.
Calibration may also be
needed. See Section 5.3.
Try cycling the printer power
'Off' and 'On'. If the fault
does not clear, call for
service.
Try cycling the printer
power 'Off' and 'On'. If the
fault does not clear, call for
service.
Advertisement
Table of Contents
