Table of Contents
Advertisement
Displayed Message
Description
The printer is paused
or / offline.
The print job is being
processed.
READY Mode.
The Present Sensor
option is enabled and a
printed label is
awaiting removal.
You are now exiting
the menu, but have
made changes to the
settings of the printer.
Pressing 'ENTER' will
save these changes; if
not, the printer will
revert to previously
saved settings.
Normal power-up / soft
reset condition.
Normal power-up / soft
reset condition.
The printer contains an
invalid calibration.
Condition(s)
The printer is in a paused
condition.
Batch status indication,
updated with each label
printed.
Normal operating mode.
The printer is ready to
receive and process label
formats.
A label blocks the
Present Sensor; remove
it to continue printing.
Menu changes have
affected the
configuration of the
printer.
; ;
Note: If changes
have been made that
require a printer reset,
the printer will
automatically invoke
that reset.
Follows the 'SYSTEM
RESET IN
PROGRESS' message
after a reset or power-
up.
Occurs when the user
resets the printer via the
host or Front Panel.
Perform calibration to
remove the condition.
See Section 5.
43
Advertisement
Table of Contents
