Printing The Tad Configuration Parameters - Olivetti Fax-Lab 480 Instructions Manual

O
UTGOING MESSAGE ONLY
Using this function, whenever an incoming call is received,
the TAD plays outgoing message 1 but does not record any
incoming messages.
You can use this function when you expect to be away for a
long time and it would not be possible to record all messages
received in your absence.
In this case, in place of the ordinary outgoing message, it is
advisable to record a different one, for example:
"From 22nd June to 19th September only faxes will be
accepted. No incoming messages will be recorded".
1. Press the key
until the display shows:
2. Press the key:
3. Press the key
until the display shows:
4. To confirm, press the key:
The display shows:
5. To select the other "ANNOUNC.ONLY:ON" option, press
the key:
/
6. To confirm the selection, press the key:
The display shows:
If you have already recorded outgoing message 1, the
display will show the message "PLAYING" and the TAD
will play it back.
If you have not yet recorded outgoing message 1, the display
will show the message "NOT RECORDED".
7. To change the outgoing message recorded previously or
to record a new one, lift the handset:
The display shows:
8. To start recording, press the key:
The display shows:
34
S
ILENT RECEPTION OF INCOMING MESSAGES
When this function is enabled, you can receive messages
confidentially. In other words, the TAD receives messages
without playing them over the speaker so that any other
persons present cannot hear your messages.
1. Press the key
until the display shows:
2. Press the key:
The display shows:
3. Press the key:
The display shows:
4. To select the other "ICM SPEAKER:OFF" option, press
the key:
/
5. To confirm the selection, press the key:
6. To return the fax machine to the stand-by mode, press the
key:
P
RINTING THE TAD CONFIGURATION
PARAMETERS
1. Press the key
until the display shows:
2. Press the key:
3. Press the key
until the display shows:
4. To confirm, press the key:
The display shows:
If the display shows: "PRINT OUT: EXIT", press the |/}
keys to display the option: "PRINT OUT:
5. To start printing, press the key:
Once this operation has been completed, the fax machine
automatically returns to its stand-by status.
".