Olivetti CopyLab 200 User Manual page 42

Printing on the media is crooked.
Problems with print head
Lines or dots are missing from the
copied/printed characters.
Copied/printed characters are faint.
Problems when copying
No pages copied.
Blank page copied.
Settings made on operator panel
are not retained.
Copying job is taking too long.
Poor quality copies
Copies are faded or
colours are dull.
42
Media has not been loaded correctly in
the input tray.
Print head is not inserted correctly in
the carriage.
The electrical contacts are dirty.
One or more of the print jets are
obstructed.
Multifunctional copier not powered.
No paper in the input tray.
Shipment blocks/tape still in place.
Protective tape still on the print head.
Document to be copied is not face-
down on the document glass.
Print head is out of ink.
Settings have not been memorised.
Best copy selected.
Colour copying is selected, but the
document to be copied is black and
white.
The copier is not ready to operate.
The document glass is dirty.
Incorrect paper type setting.
Copy Quality setting is inadequate.
Remove all the copy/print media from the input tray, then reload it,
closing the lateral guide so that it feeds without being held too tight or too
loose.
Remove and re-insert the print head, making sure it is fixed correctly in
the carriage.
Remove the print head and clean the electrical contacts both on the head
and in the carriage. Re-insert the head, fixing it correctly.
Perform the Clean function.
Switch on your multifunctional copier.
Make sure there is paper in the input tray.
Remove blocks/tape.
Remove the protective tape covering the head nozzles.
Make sure the document you are copying is placed print-side down on
the document glass.
The print head may need replacing. The best way to check this is to print
a test page. If one or more of the colours do(es) not print, replace the
print head.
Remember to align the print head whenever you replace it.
To save your current settings as defaults:
1. Press the Menu button on the operator panel until "Default Settings"
appears,
2. Choose the appropriate settings
3. Press Select to memorise each setting,
4. Press Clear to exit from the menu.
The operator panel light indicators/LCD will now show the settings you
have made.
Change the speed and quality of your copy job: Best is the slowest
setting but has the highest quality. Draft is the fastest setting and has the
lowest quality.
If the copy job is already running, press the Clear button to cancel it.
Press the B/W Copy button.
When you first switch on the multifunctional copier, it requires some time
to warn up.
The LCD will indicate when the multifunctional copier is ready to copy.
Dirty document glass slows down the copy process. Clean the glass and
restart your job.
Make sure that the paper type selected on the front panel display is the
same as the type of paper actually loaded in your multifunctional copier.
Press the Copy Quality button to select better copy quality.
Troubleshooting