Internal Battery; Error Messages - Panasonic AG-MSU10 Operating Instructions Manual

For long and Trouble-free Operation
The internal battery preserves the date and time
settings. An "E-50" indication at the top right of the
screen indicates that the internal battery has been
depleted. Follow the steps below to recharge the
battery. When the battery has been charged, set the
time and date settings.
1
Connect the unit to the AC adapter.
• Make sure the unit is turned off.
If a P2 card or storage device malfunctions during operation and copying fails, the error message shown
below will appear. (When the unit has to be shut down, all POWER, P2 and STORAGE LEDs will start to flash.)
Follow the instructions given in the error message to resume operation after an error has occurred.
If the battery runs out or the power supply is interrupted during copying or formatting of the storage device,
the following error dialog box and error message will show the result of the previous copy or format operation
the next time the unit is started up. After reading the message, press the SET button to clear the message
and resume normal operation.

Internal Battery

2
Leave the unit for about 4 hours.
• This is the time it takes to fully charge the
 NOTE:
• Replace the internal battery if the [E-50] icon appears
after charging. Consult your supplier.

Error Messages

internal battery.