Ag-Mbx10G Interface Box; Ac Adapter; Battery - Panasonic AG-MSU10 Operating Instructions Manual

AG-MBX10G interface box

Install a commercially available 2.5-type SSD with Serial ATA interface in the supplied AG-MBX10G remov-
able interface box according to the instructions in "Interface Box Setup" (page 42).
• Information on SSDs that we have tested is posted on our website.
• Be sure to turn the unit off before inserting and removing the interface box in the unit.
Failure to heed this warning may result in damage to the unit.
• Do not install a hard disk drive in the interface box.

AC adapter

Use the supplied AC adapter. Read the Operating Instructions before use.
 "Connecting the Power Cable" (page 16 ).

Battery

Use the supplied battery. (CGA-D54 for the AG-MSU10P / CGA-D54s for the AG-MSU10E)
Battery characteristics
This unit uses a rechargeable lithiumion battery that uses its internal chemical reaction to generate electrical
energy. This reaction is easily influenced by the ambient temperature and humidity, and the battery's effective
operating time is reduced as the temperature rises or falls. In very low temperatures, the battery may last only
5 minutes.
Protective circuitry functions if you use the battery where it is very hot and you will have to wait before you
can use it again.
Remove the battery after use.
Completely remove the battery. (The battery continues to be used even if you have turned the unit off.) The
battery can over discharge if you leave it in the unit and it may become impossible to recharge it.
11