Embroidering A Pattern - Baby Lock emore BLMR Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY

Embroidering a pattern

Embroidery patterns are embroidered with a change
of thread after each color.
a Prepare embroidery thread of the color shown
on the screen.
c
a
b
d
a Embroidery frames that can be used for
embroidering
b Current color step/Number of colors in design
c Current name of color
d Current color part
e Next color part
• The thread color number set displayed for the
thread colors can be changed.
Press /
change the setting in the settings screen. For
details, refer to "LCD (liquid crystal display)
operation" (page 51).
58
e
(Settings key), and then
Example: Embroidery thread number selected
b Set the embroidery thread, and thread the
needle, then pass the thread through the
embroidery foot hole, and hold it lightly in
your left hand.
Give the thread a little slack.
• Refer to "Threading the upper thread" (page
32) and "Threading the needle" (page 34).
Note
Before using the needle threader, be sure to
lower the presser foot.
CAUTION
● If the thread is pulled too tight, the needle
may break or bend.
● Do not let hands or objects hit the
carriage while embroidering. The pattern
may misalign.