Embroidery Step By Step - Baby Lock emore BLMR Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY

Embroidery step by step

The basic steps for embroidery are as follows.
Attaching the
1
embroidery unit
2 Checking the needle
Setting up the
3
bobbin thread
4 Preparing the fabric
Attaching the
5
embroidery frame
6 Selecting a pattern
7 Checking the layout
Setting up the
8
embroidery thread
16
Attach the embroidery unit. (If the embroidery unit is not attached, the
machine does not operate.)
For details, refer to "Attaching the embroidery unit" (page 17).
Use an embroidery needle matched to the fabric.
For details on replacing the needle, refer to "Replacing the needle" (page
38).
For the bobbin thread, wind poly 90 weight bobbin thread and set it in
place.
For details on setting up the bobbin thread, refer to "Winding/Installing
the Bobbin" (page 26).
Attach a stabilizer material to the fabric, and hoop it in an embroidery
frame.
For details, refer to "Preparing the Fabric" (page 44).
Attach the embroidery frame to the embroidery unit.
For details on attaching the embroidery frame, refer to "Attaching the
Embroidery Frame" (page 48).
Select an embroidery pattern.
For details, refer to "Selecting Embroidery Patterns" (page 50).
Check and adjust the size and position of the embroidery pattern.
For details on adjusting the layout, refer to "Adjusting the layout" (page
62).
Set up embroidery thread according to the pattern.
For details, refer to "Upper Threading" (page 31).