Stopping While Embroidering - Baby Lock emore BLMR Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY

Stopping while embroidering

If the embroidery is stopped before it is complete,
check the current needle count before turning off the
machine.
Memo
When the machine is turned off, the
embroidery size and layout return to the
original setting.
a Press / ("Start/Stop" button) to stop
the machine.
b Check the current needle count on the screen
and make a note of it.
If the needle count is not displayed, press
/ (Settings key), and then use
to display the following screen.
• Press (Back key) to return to the
embroidery screen.
66
c Press / (Embroidery key).
The confirmation message is displayed.
.
d Press
The selected pattern is deleted, and the
screen for selecting the embroidery pattern
type is displayed.
e Turn off the machine.
• Always detach the embroidery unit when you
move the machine.
f Turn on the machine and select the pattern.
.
g Press