Baby Lock emore BLMR Instruction And Reference Manual page 61

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
c Lower the presser foot lever.
a Presser foot lever
d Press
a "Start/Stop" button
e After progressing 5-6 stitches, press
("Start/Stop" button) to stop the machine.
f Use scissors to cut the thread at the beginning
of the stitching.
Cut the thread at the edge of the stitching.
• If the thread is left at the beginning of the
stitching, it may be sewn over as you
continue embroidering the pattern, making it
very difficult to deal with the thread after the
pattern is finished. Trim the thread at the
beginning.
1
/ ("Start/Stop" button).
1
g Press
The embroidery begins again.
Stitching stops automatically with
reinforcement after one color has been
completed. When automatic thread cutting
is set, the thread is cut.
h Press
a "Thread Cutter" button
The needle is raised and the threads are cut.
CAUTION
/
● Do not press
after threads have already been cut,
otherwise the needle may break, the
threads may become tangled or damage
to the machine may occur.
● Do not press
there is no fabric under the embroidery
foot or while the machine is
embroidering, otherwise damage to the
machine may occur.
i Set up embroidery thread for the next color,
and repeat steps
j Cut the excess thread.
When the last color is embroidered,
"Finished sewing." will appear on the
display. Press
return to the initial screen.
Memo
For the automatic cutting setting, refer to
"LCD (liquid crystal display) operation"
(page 51).
/ ("Start/Stop" button) again.
("Thread Cutter" button) once.
1
(Thread cutter button)
(Thread cutter button) if
a h
through .
, and the display will
Embroidering 59
2