Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Operation buttons
The operation buttons help you to easily perform various basic machine operations.
a "Start/Stop" button
Press the "Start/Stop" button to start or stop embroidering.
The machine embroiders at a slow speed while the button
is pressed. When embroidering is stopped, the needle is
lowered in the fabric.
The button changes color according to the machine's
operation mode.
Green:
The machine is ready to embroider or
is embroidering.
Red:
The machine can not embroider.
Orange:
The machine is winding the bobbin
thread, or the bobbin winder shaft is
moved to the right side.
b "Needle Position" button
Press the "Needle Position" button to raise or lower the
needle. Pressing the button twice sews one stitch.
c "Thread Cutter" button
Press the "Thread Cutter" button after embroidering is
stopped to cut both the upper and the bobbin threads.
CAUTION
● Do not press
button) after the threads have already
been cut, otherwise the needle may
break, the threads may become tangled
or damage to the machine may occur.
12
/
("Thread Cutter"
Note
Do not press
("Thread Cutter" button)
if there is no fabric under the presser foot or
while the machine is embroidering,
otherwise damage to the machine may
occur.
When cutting thread thicker than #30, nylon
thread or other special threads, use the
thread cutter on the side of the machine.
Hide quick links:
Advertisement
Table of Contents
