BEFORE EMBROIDERING
Embroidery Step by Step
Follow the steps below to prepare the machine for embroidery.
Step 4, 5
Step 6
Step #
Aim
1
Bobbin thread setup
2
Fabric preparation
3
Pattern selection
4
Checking the needle
5
Embroidery foot attaching
6
Embroidery unit attaching
7
Embroidery frame attachment
8
Checking the layout
9
Embroidery thread setup
* It is recommended that a 90/14 needle should be used when embroidering on heavy weight fabrics or stabilizing products (for example;
denim, puffy foam, etc.).
Step 9
Step 1
Step 2
Step 7
For the bobbin thread, wind embroidery bobbin thread and set it in place.
Attach a stabilizer material to the fabric, and hoop it in the embroidery frame.
Turn the main power to ON, and select an embroidery pattern.
Use needle 75/11 for most embroidering.
Attach embroidery foot "W+" with LED pointer.
Attach the embroidery unit.
Attach the embroidery frame to the embroidery unit.
Check and adjust the size and position of the embroidery.
Set up embroidery thread according to the pattern.
BEFORE EMBROIDERING
Step 3, 8
Action
Basic operations B-43
B
1
Page
B-31
E-11 to
E-17
E-3
B-50
B-46
B-44
E-17
E-19
E-21