AT&T Merlin II Feature Module 2 System Manual page 57

Call Coverage
If you have a Call Coverage button programmed for another person's voice
terminal, calls ring at your voice terminal when that person is away from his
or her desk. The display screen shows you the intercom number of the
person whose calls you are covering.
Caller ID
When you receive an intercom call, the caller's intercom number or an
administered station label, such as the person's name, appears on the screen.
Clock/Date, Timer, and Alarm (The BIS-34D and Sp-34D Voice Terminals)
The time-keeping features of the display unit allow you to set an alarm as
well as the clock and date.
To set the time, day, and date on the display screen of a BIS-34D or SP-34D
voice terminal:
1 Touch until the item you want to change flashes.
Set
2 Touch Fwd or Rev to advance or reverse the time, day or date.
3 When you are finished, touch Exit.
To set the alarm on the display of a BIS-34D or SP-34D voice terminal
(for example, when you want a reminder that you have a meeting in five
minutes) and permit timer operation:
1 Touch until the item you want to change flashes.
Set
2 Touch Fwd or Rev to advance or reverse the time until the display shows
the time you want the alarm to sound.
3 When you are finished, touch Exit.
(
If you wvant to return to the Time/Timer display (see the procedures for using
the Time/Timer display below),
1 Touch Time/Timer.
> 1 6 r
2 3 - I c o m
ALARM: Off 12:00 p )
MERLIN II System Features 2-51