AT&T Merlin II Feature Module 2 System Manual page 173

Voice Terminal Type
DESCRIPTION
ADMINISTRATION
When the system is first set up, the system recognizes all analog stations
except the administrator/attendant console as BIS/HFAI voice terminals,
that is, voice terminals with raised plastic buttons. As part of basic
administration, you must identify for the system any analog station jacks used
for non-BIS/HFAI voice terminals, which have flat membrane buttons.
Voice terminals with flat membrane buttons (non-BIS/HFAI models)
include the 5-button, 10-button, 34-button, and 34-button deluxe voice
terminals.
Voice terminals with raised plastic buttons (BIS/HFAI models) include the
HFAI-10, BIS-10, BIS-22, BIS-34, BIS-34D, SP-34, and SP-34D voice
terminals.
To specify which station jacks are connected to voice terminals with flat
membrane button voice terminals and which station jacks are connected to
voice terminals with raised plastic buttons, enter administration mode and
follow the appropriate procedure below.
With a MERLIN II System Display Console
1 From the administration mode, touch
2 Touch the Auto Intercom buttons until the green lights show the
appropriate code:
Green light on = raised plastic button voice terminal
Green light off = flat membrane button voice terminal
3 Touch Conference to return to the administration menu, or leave
administration mode.
With a BIS-34D Console
1 Touch Message.
2 Dial # 320.
3 Touch the Auto Intercom button until the green light shows the
appropriate code:
Green light on = a BIS/HFAI (raised plastic button) voice terminal is connected
Green light off = a flat membrane button voice terminal is connected
4 Touch Message and go on to another procedure, or leave administration
mode.
[Stations], [More], [BIS/HFAI]
to this voice terminal jack
to this voice terminal jack
MERLIN II System Features
.
2-167