AT&T MERLIN 3070 Administration Manual page 119

Quick Reference Guide to Administration Procedures
Procedure
CUSTOMIZE WITH OTHER SYSTEM OPTIONS
Assign outward and toll call
restrictions to voice
terminals.
NOTE: If you do not need to
dial a toll prefix (O or 1) to
place a long distance call,
follow steps 1 and 2 below. If
you use a toll prefix, just
follow step 2 below.
1. Set lines to identify long
distance calls by area
code only.
2. Assign restrictions to voice
terminals.
(See page 42.)
Give a voice terminal the
same line and call restriction
assignments as another
voice terminal.
Set up alloweci lists.
(See page 44.)
Assign allowed-list call
restrictions to voice
terminals.
(See page 45.)
118
(continued)
Touch
Touch line buttons.
Call Rstr
Steady green on = toll prefix
Green off = area code only
Touch Call Rstr.
Touch Auto Intercom button representing voice terminal.
Adm Tel
Touch Call Rstr.
Steady green on = all calls permitted
Flashing green = local and intercom calls and any
Green off = intercom calls and any assigned lists
Touch Adm Tel.
Touch Auto Intercom button representing new voice terminal.
Adm Tel
Touch Copy.
Touch Auto intercom button representing voice terminal whose
assignments you want to copy.
Dial #5.
Adm Misc
list
Dial number (0 through 7), then dial entry number (0
through 9).
Dial entry (area code and/or exchange).
Dial #900 to get a printout of an allowed list.
Touch Adm Misc.
Dial #4, then dial list number (O through 7).
Adm Misc
Touch Auto intercom button representing voice terminal.
Steady green on = access to numbers in list
Green off = no access to numbers in list
Touch Adm Misc.
Then
assigned lists