AT&T MERLIN 3070 Administration Manual page 102

I.
Rotary Lines
If you have any rotary outside lines, circle the "r" next to each line on the
System Configuration Form. If you aren't sure if you have rotary orTouch-
Tone lines, call your local telephone company.
J.
Night Service
If your system will have an extra-alerting device, check "Night Ring" on
the System Configuration Form to indicate which lines will activate this
device when the person who usually answers calls is not available. if you
have more than one extra-alerting device, indicate on the form which
device will be activated by which lines. (For a more detailed explanation,
see page 56.)
K.
SMDR Options
If your system will use SMDR (Station Message Detail Recording) to keep
a record of calls, fill in the minimum length of calls to be recorded. (If you
don't specify a minimum call length, the system doesn't record calls that
last less than 1 minute.) If you want to record all calls, enter "O." Also in-
dicate whether or not the system should record incoming calls. (For a more
detailed explanation, see page 60.)
L.
System Speed Dial Numbers
If you want to store numbers that anyone in your business can dial using
a 3-character code, fill in these numbers on the System Speed Dial Direc-
tory, page 110. You can associate up to 40 digits and special characters,
including pause (p), recall (r), and Touch-Tone Enable (t), with each System
Speed Dial code. (For a more detailed explanation, see page 57.)
M.
Group Page Groups
If you plan to use the Group Page feature, which allows people to receive
paging messages through their voice terminal speakers, you need to
assign intercom numbers to Group Page groups. On the Group Page
Directory, page 111, fill in the intercom numbers and names of people
designated for each group. You may establish up to seven groups, each
covering a maximum of ten people. (For a more detailed explanation, see
page 55.)
101