Frequency Control Option - ECS P6VXM2 Manual

Frequency Control Option

This item enables you to set the clock speed and system bus for
your system. The clock speed and system bus are determi ned
by the kind of processor you have installed in your system.
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Host/PCI Clock
CPU clock failed reset
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
Auto Detect DIMM/PCI Clk
When this item is enabled, BIOS will disable the clock signal of free
DIMM and PCI slots.
Spread Spectrum Modulated
If you enable spread spectrum, it can significantly reduce the EMI (Elec-
tro-Magnetic Interference) generated by the system.
CPU Host/PCI Clock
These items appear if you have set the CPU Internal Core Speed to
Manual. Use the CPU/DIMM/PCI Clock to set the frontside bus fre-
quency for the installed processor (usually 133 MHz, 100 MHz or 66
MHz). Then use CPU Clock Ratio to set a multiple.
CPU Clock failed reset
When this item is enabled and the system crashes three times because
the processor has been overclocked, the BIOS will automatically adjust
the speed of the processor to the system bus speed multiplied by two.
Frequency Control
Enabled
Disabled
Default
Disabled
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
64
Item Help
Menu Level
F1:General Help
Default: Enabl ed
Default: Disabled
Default: Default
Default: Disabled