Frequency/Voltage Control - ECS L7VMM2 Manual

Frequency/Voltage Control

This item enables you to set the clock speed and system bus for your system.
The clock speed and system bus are determined by the kind of processor you
have installed in your system.
Phoenix – AwardBIOS CMOS Setup Utility
Auto Detect PCI/DIMM Clk
Spread Spectrum Modulated
CPU Host/AGP/PCI Clock
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
Auto Detect PCI/DIMM Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM and
PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-
Magnetic Interference) generated by the system.
CPU Host/AGP/PCI Clock (Default)
This item is used for overclocking only.
Frequency/Voltage Control
[Enabled]
[Enabled]
[Default]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
50
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults