Power Management Setup Page - ECS P6S5AT User Manual

Mainboard User's Manual

Power Management Setup Page

This page sets some of the parameters for system power
management operation.
ACPI Aware O/S
Power Management
Suspend Time Out
Hard Disk Time Out
Ring On Power On
RTC Alarm Power On
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
KeyBoard PowerOn Function
ACPI Aware O/S
Enable this item if you are using an O/S that
supports ACPI function such as Windows 98/ME
/2000.
Power
Use this item to select a power management
Management scheme. Both APM and ACPI are supported.
Suspend Time Out
This sets the timeout for Suspend mode in
minutes. If the time selected passes without any
system activity, the computer will enter power -
saving Suspend mode.
Hard Disk Time
This sets the timeout to power down the hard disk
Out drive, if the time selected passes withou t any hard
disk activity.
Ring On Power On
The system can be turned off with a software
command. If you enable this item, the system can
automatically resume if there is an incoming call
on the Fax/Modem. You must use an ATX power
supply in order to use this feature.
RTC Alarm Power
The system can be turned off with a software
On / Date / Hour / command. If you enable this item, the system can
automatically resume at a fixed time based on the
Minute / Second
system's RTC (realtime clock). Use the items
below this one to set the date and time of the
wake-up alarm. You must use an ATX power
supply in order to use this feature.
24
Yes
Enabled
Disabled
Disabled
Disabled
Disabled
Every Day
12
30
00
ESC : Quit
Disabled
F1 : Help
F5 : Old Values (Shift)F2
F6 : Load Optimal values
F7 : Load Best performance values
↑↓←→ : Select Item
PU/PD/+/ - : Modify
: Color