Uninstalling Maxcommunicator; Automatic Upgrade; Downgrade Procedure - Altigen MaxCommunicator Manual

1. Exit all Windows applications.
2. Insert the MAX Communication Server 6.0 Clients CD into the CD
ROM drive.
3. Open the MaxCommunicator folder, and run the Setup program in
that folder, following the step-by-step installation instructions as they
appear on the screen.
Alternatively, if your system administrator has loaded MaxCommunicator
on a shared network server, you can copy the files in the
MaxCommunicator folder to your desktop PC, and run the
MaxCommunicator Setup program.

Uninstalling MaxCommunicator

1. From the Windows Start menu, select Control Panel > Add/Remove
Programs > MaxCommunicator to uninstall MaxCommunicator.
2. Click Remove, and respond to any additional prompts.

Automatic Upgrade

Each time you start up MaxCommunicator, a comparison is made with the
version of MAX Communication Server ACC/ACM that is running on the
server. If updates were made on the server, and your version of
MaxCommunicator is out-of-date, you are prompted for upgrade
permission. If you automatically upgrade, the MaxCommunicator startup is
terminated and a software upgrade session is started. Restart
MaxCommunicator to run the newer version.
Note: For remote MaxCommunicator users outside the firewall, TCP
port 10050 is required to be open to allow automatic upgrade.
Automatic upgrade over the Internet requires the sending of 15 MB
files over the WAN, which may take some time, to perform the
automatic update.

Downgrade Procedure

1. Go to Control Panel > Add/Remove Programs and remove the
MaxCommunicator 6.0 program and ALL OTHER 6.0 client
4 MaxCommunicator Manual