Call Management - Altigen AltiServ User Manual

For altiware acc release 5.1 and altiware acm release 5.1
Hide thumbs Also See for AltiServ:
Table of Contents

Advertisement

Call Management

Feature
Dial
Station Log Out #26
<pass-
word>
Station Log In
#27
<ext>
<pass-
word>
Account Code
#32
(before calling)
<acct.
code>
Account Code
FLASH
(during a call)
(wait for
dial tone)
#32 <acct.
code>
Do Not Disturb
#33
/ Deactivate Do
Not Disturb
Call Forward-
#36 <pass-
ing
word>
<destina-
tion> #
1
If you are unable to make calls within certain area codes, check with your system adminis-
trator for any toll restrictions placed on codes and dialing prefixes.
a
Description
Deactivates or shuts off your extension, forward-
ing all calls to voice mail. This feature can be
used to move your extension from your phone set
to another phone set in the office.
Reactivates your extension at your original phone
set or another one.
If you log in at a location already occupied by
another extension, you can activate the extension
using only #27. (#26 is not necessary to deacti-
vate the previous existing extension.)
If you have an extension assigned at another loca-
tion and log in the extension at a new location,
you can activate the extension using only #27.
(#26 not necessary to deactivate the old exten-
sion/line.) The old location will become an unas-
signed location/line (IP phone failover feature).
#27 can also be used to hear the currently active
extension number for the phone set.
After entering the account code (a maximum of
ten digits), make the call when you hear the dial
tone. This feature can be used for client billing
purposes.
Press FLASH, wait for the dial tone, enter #32
and the account code followed by #. You will
then be reconnected to the call.
Activates Do Not Disturb when it's off, deacti-
vates it when it's on. While activated, all calls are
forwarded to busy handling.
Forwards all calls to the destination, which can be
an internal extension or external phone number
including access code, long distance prefix and
area code. To deactivate forwarding, press #36
again, or deactivate from within the AltiGen
Voice Mail System.
AltiServ User Guide
15

Advertisement

Table of Contents
loading

Table of Contents