Tenants Page - System Configuration - Altigen AltiServ HPBX Administration Manual

If the trunk number is not configured either, then the system main
number is sent as the calling number.

Tenants Page - System Configuration

Figure 2. Tenants page, System Configuration
In the Tenants page of System Configuration:
• Tenant Operator field - each tenant group is assigned a local
operator. This local operator can only be accessed by members of this
tenant group.
When a call is routed into a tenant's Auto Attendant, the tenant
extension's voice mail, or if the tenant extension dials the operator, this
call will be sent to the specified tenant operator.
If the tenant operator is not configured, this call will be routed to the
System Tenant (Tenant ID "0") operator.
AltiServ HPBX Supplement 5