Install Handset Batteries - ClearSounds A1600 Quick Start Manual

Setup

Install handset batteries

Use only rechargeable AAA NiMH batteries.
Other types of batteries can damage the phone and
cause personal injury.
To install handset batteries
1. Push on the battery cover, and slide
back and remove the cover.
2. Insert the batteries according to the marked
polarity symbols.
3. Slide the battery cover until it snaps into place.
4
Register handsets
The telephone handset that you purchased with
your ClearSounds A1600 telephone system is
registered to the base that came with the system
(Base-1).
If you have additional ClearSounds A1600E
handsets, you must register each additional handset
to the base. The system can accommodate a total
of fi ve handsets.
Each handset's registration number appears on the
handset's home screen.
To register an additional handset to the base
This task requires your PIN number. The factory
default PIN number is 0000.
1. Remove from the base the handset that came
with the base (HS 1).
2. Press and hold on the base until you hear
one continuous, loud tone.
If you hear the repetitive paging tones, you must
try again and hold longer.
3. On the handset that you are registering, press
beneath Menu on the screen.
4. Press and scroll to Registration, and then
33