Information For Optional Large-Size Hoop Users; Creating Patterns For Multi-Position Hoops; Selecting The Design - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 203 Thursday, July 8, 2004 11:59 AM

Information for Optional Large-Size Hoop Users

Creating Patterns for Multi-Position Hoops

This program enables you to create multi-position patterns that you can stitch in any multi-position hoop
attached to your sewing machine.
Although the size of the pattern that can be embroidered using an multi-position hoop is 130 × 180 mm (or 100
× 100 mm, depending on the sewing area of the embroidering machine), first determine which of the three
installation positions (indicated as a, b, and c in the illustration above) the multi-position hoop will be installed
at and determine the orientation of the pattern.
When creating the pattern, each pattern section can only be as large as the sewing field of the machine.
Selecting the Design Page
size
1.
In Layout & Editing, click Option, then Design
Page Property.
→ The Design Page Property dialog box
appears.
Layout & Editing
a
c
Example of multi-position hoop: 100 × 172 mm hoop
ABC
b
2.
Select Hoop Size, and then choose a Design
Page size of 130 × 300 mm, 300 × 130 mm,
100 × 172 mm, or 172 × 100 mm from the
selector.
b
Memo:
• Settings for multi-position hoops are
indicated by "*".
• Choose the appropriate setting after
checking the size of the hoop available for
your machine.
a
Note:
Multi-position hoop settings are not available
in the Design Page Property dialog box of
Design Center.
a
b
c
203