Brother PE-Design 6.0 Instruction Manual page 128

PeDesignV6Eng.book Page 120 Thursday, July 8, 2004 11:59 AM
Layout & Editing
b
Memo:
• To return to the previous dialog box, click
Previous.
• To quit the operation and close the dialog
box, click Cancel.
7.
Click Finish.
→ An embroidery pattern is created and dis-
played in the Design Page.
■
If Photo Stitch 1 (Mono) is
selected
→ A Select Mask dialog box similar to the
one shown below appears.
a
Note:
If the width or height of the image exceeds
500 mm, the Photo Stitch functions cannot
be used.
1.
From the list at the bottom of the dialog box,
select the desired shape that the image will be
trimmed to (mask).
b
Memo:
To automatically set a mask so that the
background is trimmed off, click Auto
Generate.
2.
In the image preview box, move the handles of
the mask until it surrounds the desired part of
the image
c
For details on the settings, refer to
page 117.
120
Inputting Images and Embroidery Patterns
3.
In the Select Mask dialog box, click Next.
→ A Gray Balance dialog box similar to the
one shown below appears.
4.
Move the slider to specify which parts of the
image to create the embroidery pattern for.
b
Memo:
• Areas not set to be sewn are shown filled
with a crosshatch pattern.
• An embroidery pattern will be created from
any areas remaining in black.
• To return to the previous dialog box, click
Previous.
• To quit the operation and close the dialog
box, click Cancel.