Online Registration; Uninstallation; Technical Support - Brother PE-Design 6.0 Instruction Manual

BeforeUsing.fm Page 13 Thursday, July 8, 2004 2:57 PM
→ If the upgrade has been completed suc-
cessfully, the dialog box shown below ap-
pears.

Online registration

If you wish to be contacted about upgrades and provided with important information such as future product
developments and improvements, you can register your product online by following a simple registration
procedure.
Click Online Registration on the Help menu of Layout & Editing to start up the installed Web browser and
open the online registration page on our Web site.
a
Note:
Online registration may not be available in some areas.

Uninstallation

1.
Turn on the computer and start up Windows.
2.
Click the Start button in the task bar, and then click Control Panel.
3.
In the Control Panel window, double-click Add or Remove Programs.
a
Note:
With an operating system other than Windows XP, point to Settings in the Start menu, and then click
Control Panel. In the Control Panel window, double-click Add/Remove Programs.
4.
In the dialog box that appeared, select this software, and then click Change/Remove.

Technical support

Contact Technical Support if you have a problem. Please check the company web site (www.brother.com) to
find the Technical Support in your area.
a
Note:
Have the following information ready before contacting Technical Support.
• The make and model of the computer that you are using as well as the Windows version (Refer to
page 8 and check the system requirements for this product again.)
• Information on any error messages that appear
Before Use
a
Note:
If a warning appears at any time, follow the
instructions that are displayed.
13