Brother PE-Design 6.0 Instruction Manual page 129

PeDesignV6Eng.book Page 121 Thursday, July 8, 2004 11:59 AM
Layout & Editing
5.
In the Gray Balance dialog box, click Next.
→ The Photo Stitch 1 Parameters dialog
box appears.
6.
Specify the settings for creating the
embroidery pattern.
b
Memo:
• To return to the previous dialog box, click
Previous.
• To quit the operation and close the dialog
box, click Cancel.
Sewing Option
Specifies how detailed the created
embroidery pattern will be. Selecting a
Detail setting closer to Fine creates more
details in the pattern and increases the
number of stitches.
Sets the sewing pitch. The pattern is
created with this setting value as the
Run pitch minimum length.
Range: 2 to 10 mm (0.08 to 0.39 inch)
Default: 3 mm (0.12 inch)
Select what parameter is given priority
when converting to embroidery pattern.
Stitch Quality: Creates a pattern while
giving priority to the stitching quality.
However, many jump stitches will result.
Conversion
Jump Stitch Reduction: Creates a
Priority
pattern while giving priority to reducing
the number of jump stitches in order to
reduce complications during
embroidering. However, the stitching
quality will be slightly reduced.
Inputting Images and Embroidery Patterns
Image Type
If Photo is selected, the thread colors
will be mixed together, which will result
in a more natural look.
If Cartoon is selected, the thread colors
Photo/
will not be mixed together, which will
Cartoon
result in a more simply colored look.
Select Photo for image data from a
photograph, etc. Select Cartoon for
image data from an illustration, etc.
Use Color
Specifies the color of thread used to create the
embroidery pattern.
The default setting is the darkest color in the
current thread chart.
In the list, select the color that you want
to change, and then click this button to
Change
open the Thread Color dialog box,
Color
which lets you change the thread color
used in the embroidery pattern.
7.
In the Photo Stitch 1 Parameters dialog box,
click Next.
→ A Preview dialog box similar to the one
shown below appears, allowing the creat-
ed embroidery pattern to be previewed.
b
Memo:
• To return to the previous dialog box, click
Previous.
• To quit the operation and close the dialog
box, click Cancel.
121