Usb Storage Device Network And Access Settings - NETGEAR AC1200 JR6100 User Manual

USB Storage Device Network and Access Settings

You can set up the device name, workgroups, and network folders for your USB device.

To view or change the USB storage advanced settings:
1. Select ADVANCED > ReadySHARE > Advanced Settings.
2. Specify access to the USB storage device.
• Network Device Name. The default is readyshare. This is the name used to access
the USB device connected to the router.
• Workgroup. If you are using a Windows workgroup rather than a domain, the
workgroup name displays here. The name works only in an operating system that
supports NetBIOS, such as Microsoft Windows.
• Access Method. Select the check boxes for the access methods that you want.
- Network Neighborhood/MacShare. Enabled by default.
- HTTP. Enabled by default. You can type
http://readyshare.routerlogin.net/shares to access the USB drive.
- HTTP (via Internet). Disabled by default. If you enable this feature, remote users
can type http://<public IP address/shares> (for example, http://1.1.10.102/shares)
or a URL domain name to access the USB drive over the Internet. This feature
supports file uploading only.
- FTP. Disabled by default.
- FTP (via Internet). Disabled by default. If you select this check box, remote users
can access the USB drive through FTP over the Internet. This feature supports
both downloading and uploading of files.
3. If you changed the settings, click the Apply button.
Your changes are saved.
AC1200 WiFi Router JR6100
USB Storage
50