Belkin F1PI210ENau User Manual page 6

Knowing your VoIP Router
On - VoIP activity, i.e. phone is in use
On - Flashing, Incoming call, i.e., phone is ringing
Off - No VoIP activity
8. Tomizone (F1PI242EGau only)
This light will illuminate when Tomizone is enabled and activated.
On – Tomizone enabled and activated
Off – Tomizone disabled/deactivated
9. USB (F1PI242EGau only)
When a USB mass storage device is connected to the USB Port, this
light will illuminate to inform you the attached storage device is ready
for use.
On – Attached USB Mass Storage Device connected and ready for use
Off – No attached USB Mass Storage Device
F1PI242ENau
1 2 4
F1PI242EGau
1 2 3 4
Back Panel
1. ADSL Line
This port is for connection to your ADSL line. Connect your ADSL line
to this port.
8
5 6 7
5 6 7
Knowing your VoIP Router
2. LAN Ports
The Ethernet port is RJ45, 10/100 auto-negotiation. Connect your net
work-enabled computers or any networking devices to this port.
3. USB (F1PI242EGau only)
USB port for attaching USB Mass Storage Devices.
4. Power Plug
Connect the included 12V 1A DC power supply to this inlet. Using the
wrong type of power adapter may cause damage to your Modem.
5. Reset Button
The "Reset" button is used in rare cases when the Modem may
function improperly. Resetting the Modem will restore the Modem's
normal operation while maintaining the programmed settings. You can
also restore the factory default settings by using the Reset button. Use
the restore option in instances where you may have forgotten your
custom password.
a. Resetting the Modem
Push and hold the Reset button for one second then release it.
When the PWR light becomes solid again the reset is complete.
b. Restoring the Factory Defaults
Push and hold the Reset button for ten seconds then release it.
When the PWR light becomes solid again the restore is complete.
6. PSTN Failover Port
The Optional RJ-11 port is for connection to your PSTN (Home Phone)
line to provide Normal Phone call backup for when VOIP is unavailable
or not required.
7. Phone Port
Phone Ports connect to standard analogue telephone set or fax machine.
9
1
2
3
4
5
6
7