Belkin F1PI210ENau User Manual page 17

Advanced Setup Method
LAN
Use the LAN menu to configure the LAN IP address and to enable the
DHCP server for dynamic client address allocation.
30
Advanced Setup Method
Parameter Description
LAN IP
IP Address: The IP address of the VoIP Router
IP Subnet Mask: The subnet mask of the VoIP Router
Host Name: If your ISP requires a hostname specified enter here,
otherwise leave blank
DHCP Server: To dynamically assign an IP address to client PCs,
enable the DHCP (Dynamic Host Configuration Protocol) Server
VLAN Binding
In this section you can assign VLAN's that you have created in the
VLAN page to certain ports such as LAN port 1, 2, 3 or 4 and the
WLAN connection. For instance if you have created a VLAN Binding
called "Test", and you want anything connected to the wireless to be
on that VLAN, then you would change the WLAN setting on this page
from "Default" to the one you created called "Test".
Parameter Description
DHCP SERVER
DHCP Option 60 Vendor ID: If you wish you can specify the Name of
your DHCP Server (Optional)
Lease Time: Specify the length of time that the DHCP will assign an
IP address to a computer for
IP Address Pool
Start IP: Specify the start IP address of the DHCP pool. Do not
include the gateway address of the VoIP Router in the client address
pool. (See "TCP/IP Configuration"). If you attempt to include the VoIP
Router gateway address (10.1.1.1 by default) in the DHCP pool, an
error dialog box will appear. If you change the pool range, make sure
the first three octets match the gateway's IP address, i.e. 10.1.1.xxx
End IP: Specify the end IP address of the DHCP pool.
Domain Name: If your network uses a domain name, enter it here.
Otherwise, leave this field blank
31
1
2
3
4
5
6
7