Belkin F5D7632uk4v3000 User Manual
  1. Manuals
  2. Brands
  3. Belkin Manuals
  4. Modem
  5. F5D7632uk4v3000
  6. User manual

Belkin F5D7632uk4v3000 User Manual

Adsl modem with wireless g router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Share
User Manual
User Manual
Network your computers and
share your ADSL Internet access
ADSL Modem with
Wireless G Router
Designed to Meet ADSL2+ Specification
802.11g
802.11g
Mbps
2.4GHz • Wir
2.4GHz • Wireless
F5D7632uk4v3000

Advertisement

Table of Contents
loading

Related Manuals for Belkin F5D7632uk4v3000

Summary of Contents for Belkin F5D7632uk4v3000

  • Page 1 Network your computers and Share share your ADSL Internet access User Manual User Manual ADSL Modem with Wireless G Router Designed to Meet ADSL2+ Specification 802.11g 802.11g 2.4GHz • Wireless 2.4GHz • Wir F5D7632uk4v3000 Mbps...

  • Page 2: Table Of Contents

    Benefits of a Home Network ......5 Advantages of a Belkin Wireless Network....5 2 Make Sure You Have the Following .

  • Page 3: Introduction

    Introduction Thank you for purchasing the Belkin ADSL Modem with Wireless G Router (the Router). In minutes you will be able to share your Internet connection and network your computers with your new Router. The following is a list of features that make your Router an ideal solution for your home or small office network.
  • Page 4 Introduction Integrated 802.11g Wireless Access Point 802.11g is an exciting new wireless technology that achieves data rates up to 54Mbps, nearly five times faster than 802.11b. Built-In Dynamic Host Configuration Protocol (DHCP) Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes for the easiest possible connection of a network. The DHCP server will assign IP addresses to each computer automatically so there is no need for a complicated networking setup.

  • Page 5: Benefits Of A Home Network

    – set up and access printers, computers, and other networking devices from anywhere in your home Easy Expansion – the wide range of Belkin networking products let you expand your network to include devices such as printers and gaming consoles No cabling required –...

  • Page 6: Make Sure You Have The Following

    Make Sure You Have the Following Package Contents • ADSL Modem with Wireless G Router • RJ11 Telephone Cord - Gray • RJ45 Ethernet Networking Cable — Yellow • USB 1.0 Cable — Blue • ADSL Microfilter* • Power Adapter •...

  • Page 7: Knowing Your Router

    Knowing your Router The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility. The LED indicators are easily visible on the front of the Router to provide you with information about network activity and status.
  • Page 8 Knowing your Router 3. WLAN Status LED The WLAN Status LED is solid GREEN when you enable the wireless LAN function. It flashes when the Router is transmitting or receiving data wirelessly. ���� �������� Green WLAN Green blinking 4. ADSL LED The ADSL LED flashes GREEN during negotiation with your ISP.
  • Page 9 Knowing your Router Back Panel The following figure illustrates the rear panel of your Router. DSL Line This port is for connection to your ADSL line. Connect your ADSL line to this port. Power Plug Connect the included 15V DC power supply to this inlet. Using the wrong type of power adapter may cause damage to your Router.

  • Page 10: Connecting Your Router

    Connecting your Router Positioning your Router Your wireless connection will be stronger the closer your computer is to your Router. Typical indoor operating range for your wireless devices is between 100 and 200 feet. In the same way, your wireless connection and performance will degrade somewhat as the distance between your Router connected devices increases.

  • Page 11: Connecting Your Adsl Line

    Connecting your Router Connecting your ADSL Line Connection for the Router to the ADSL line varies by country and region. Typically it involves a microfilter or a microfilter with built-in splitter to allow simultaneous use of ADSL service and telephone service on the same telephone line.

  • Page 12: Powering Up Your Router

    Connecting your Router If you have a dedicated ADSL service telephone line with an RJ11 wall jack, simply connect a telephone cord from the wall jack to the gray RJ11 port labeled “DSL line” on the back of your Router. If you have an RJ45 wall jack for your ADSL service, connect an RJ45- to-RJ11 converter to the wall jack.

  • Page 13: Running The Setup Wizard

    Connecting your Router Turn on your computers. After your computers boot up, the LAN status on the front of the Router will be on for each port to which a wired computer is connected. These lights show you the connection and activity status.
  • Page 14 Connecting your Router Connecting your Router The Setup Wizard will start automatically for express configuration (recommended) Click “Next” to continue. The first step is to select your country and ISP, and click “Next”. If your country and/or ISP is not listed, select “Other Country” or “Other ISP.” Then select your connection type, PPPoE, PPPoA, or other types.
  • Page 15 LAN settings: SSID = Belkin54g Note: Belkin strongly recommends that you enable wireless security to WEP or WPA and change SSID to something of your own. Please read the User Manual for details on levels of wireless security and how to...
  • Page 16 Note: You can always restart the Setup Wizard or use the Navigation Menu on the left to change your setting. Congratulations! You have finished installing your new Belkin Router. Click “OK” to activate your settings. To test your Internet connection, open your browser and visit any website, such as www.belkin.com.

  • Page 17: Manually Configuring Your Router

    Manually Configuring your Router Understanding the Web-Based User Interface The home page shows you a quick view of the Router’s status and settings. All advanced setup pages can be reached from this page. Quick-Navigation Links You can go directly to any of the Router’s UI pages by clicking directly on these links.

  • Page 18: Internet Settings

    Manually Configuring your Router Login/Logout Button This button enables you to log in and out of the Router with the press of one button. When you are logged into the Router, this button will change to read “Logout”. Logging into the Router will take you to a separate login page where you will need to enter a password.

  • Page 19: Changing Lan Settings

    IP. Examples of a non-routable IP are: 192.168.x.x (where x is anything between 0 and 255) 10.x.x.x (where x is anything between 0 and 255) Subnet Mask There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router.
  • Page 20 Manually Configuring your Router DHCP Server The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network automatically. The default setting is “On”. The DHCP server can be turned OFF if necessary, however, in order to do so you must manually set a static IP address for each computer on your network.

  • Page 21: Dhcp Client List

    Local Domain Name The default setting is “Belkin”. You can set a local domain name (network name) for your network. There is no need to change this setting unless you have a specific advanced need to do so. You can name the network anything you want such as “MY NETWORK”.

  • Page 22: Connection Type

    Manually Configuring your Router To configure the Router with the settings that your ISP gave you, click “Connection Type” (1) on the left side of the screen. Select the connection type you use. If your ISP gave you DNS settings, clicking “DNS” (2) allows you to enter DNS address entries for ISPs that require specific settings.
  • Page 23 Manually Configuring your Router Select the type of connection you use by clicking the radio button (1) next to your connection type and then clicking “Next”. Setting your ISP Connection Type to PPPoE or PPPoA PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of connecting networked devices.
  • Page 24 Manually Configuring your Router User Name - Enter the user name. (Assigned by your ISP). Password - Enter your password. (Assigned by your ISP). Retype Password (Assigned by your ISP). IP Assigned by ISP assigns IP address. If your ISP assigned a fixed IP address, select “No”...
  • Page 25 Manually Configuring your Router Setting your Connection Type to Dynamic IP (1483 Bridged) This connection method bridges your network and ISP’s network together. The Router will obtain IP address automatically from your ISP’s DHCP server. IP Assigned by ISP assigns IP address. If your ISP assigned a fixed IP address, select “No”...
  • Page 26 DNS (Domain Name Server) Settings A “Domain Name Server” is a server located on the Internet that translates Universal Resource Links (URLs) like “www.belkin.com” to IP addresses. Many ISPs do not require you to enter this information into the Router. The “Automatic from ISP”...
  • Page 27 Manually Configuring your Router Leave the “Automatic from ISP” box checked. To enter the DNS address settings, uncheck the “Automatic from ISP” box and enter your DNS entries in the spaces provided. Click “Apply Changes” (2) to save the settings. Using DDNS (Dynamic DNS) The DDNS service allows you to alias a dynamic IP address to a static host name in any of the many domains DynDNS.org offers, allowing your network...

  • Page 28: Wireless

    Manually Configuring your Router Setting up the Router’s Dynamic DNS Update Client You must register with DynDNS.org’s free update service before using this feature. Once you have your registration, follow the directions below. Enter your DynDNS.org user name in the “Account / E-mail” field (1). Enter your DynDNS.org password in the “Password / Key”...

  • Page 29: Channel And Ssid

    Manually Configuring your Router Channel and SSID 1. Changing the Wireless Network Name (SSID) To identify your wireless network, a name called the SSID (Service Set Identifier) is used. The default SSID of the Router is “belkin54g”. You can change this to anything you want to or you can leave it unchanged. If there are other wireless networks operating in your area, you will want to make sure that your SSID is unique (does not match that of another wireless network in the area).
  • Page 30 Manually Configuring your Router 3. Using the Wireless Mode Switch Your Router can operate in three different wireless modes: “Mixed (11b+11g)”, “11g Only”, and “11b Only”. The different modes are explained below. “Mixed (11b+11g)” Mode —In this mode, the Router is compatible with 802.11b and 802.11g wireless clients simultaneously.
  • Page 31 Manually Configuring your Router Encryption/Security Securing your Wi-Fi Network Here are a few different ways you can maximize the security of your wireless network and protect your data from prying eyes and ears. This section is intended for the home, home office, and small office user. At the time of this User Manual’s publication, there are three encryption methods available.
  • Page 32 Most of the new wireless equipment in the market today supports both 64-bit and 128-bit WEP encryption, but you might have older equipment that only supports 64-bit WEP. All Belkin wireless products will support both 64-bit and 128-bit WEP Encryption Keys After selecting either the “64-bit”...
  • Page 33 IMPORTANT: You also need to ensure that all your wireless client cards / adapters support WPA2, and that you have downloaded and installed the latest driver. Most of the Belkin Wireless cards have update driver available for download from the Belkin support site: www.belkin.com/networking.
  • Page 34 Manually Configuring your Router Sharing the Same Network Keys Most Wi-Fi products ship with security turned off. So once you have your network working, you need to activate WEP or WPA and make sure your wireless networking devices are sharing the same Network key. Network key= MyPassword Wireless...

  • Page 35: Wep Setup

    Manually Configuring your Router Note to Mac users: Original Apple AirPort® products support 64-bit encryption only. Apple AirPort 2 products can support 64-bit or 128-bit encryption. Please check your product to see which version you are using. If you cannot configure your network with 128-bit encryption, try 64-bit encryption.

  • Page 36: Changing The Wireless Security Settings

    Microsoft. This patch works only with the Windows XP operating system. You also need to download the latest driver for your Belkin Wireless G Desktop or Notebook Network Card from the Belkin support site. Other operating systems are not supported at this time.
  • Page 37 Manually Configuring your Router Setting WPA/WPA2-PSK (no server) From the “Allowed Client Type” drop-down menu, select “WPA/ WPA2”. For Authentication, select “Pre-shared Key” for typical home/SOHO use. This setting will have to be identical on the clients that you set Enter your Pre-Shared key.
  • Page 38 Network Cards to Use Security Please Note: This section provides information on how to configure your Belkin Wireless G Network Cards to use security. At this point, you should already have your Wireless Router or access point set to use WPA or WEP. In order for you to gain a wireless connection, you will need to set your wireless notebook card and wireless desktop card to use the same security settings.
  • Page 39 Manually Configuring your Router Connecting your Computer to a Wireless Network that Requires a 64-Bit or 128-Bit WEP Key Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen. The “Advanced” button will allow you to view and configure more options of your wireless card.
  • Page 40 Manually Configuring your Router Connecting your Computer to a Wireless Network that Requires WPA-PSK (no server) Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen. The “Advanced” button will allow you to view and configure more options of your wireless card. Under the “Wireless Networks”...
  • Page 41 Manually Configuring your Router Connecting your Computer to a Wireless Network that Requires WPA (with radius server) Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen. The “Advanced” button will allow you to view and configure more options of your wireless card. Under the “Wireless Networks”...

  • Page 42: Supported Operating Systems

    Manually Configuring your Router Setting Up WPA for a Non-Belkin Wireless Desktop and Wireless Notebook Cards For non-Belkin WPA Wireless Desktop and Wireless Notebook Cards that are not equipped with WPA-enabled software, a file from Microsoft called “Windows XP Support Patch for Wireless Protected Access”...
  • Page 43 Manually Configuring your Router Setting Up Windows XP Wireless Network Utility to Use WPA-PSK In order to use WPA-PSK, ensure you are using Windows Wireless Network Utility by doing the following: Under Windows XP, click “Start > Control Panel > Network Connections”.

  • Page 44: Wireless Range Extension And Bridging

    Note: We can make no guarantees that this feature will interoperate with hardware from other wireless mavnufacturers. Note: Please make sure to download the latest firmware version for the Router or Access Point for optimal performance at: http://web. belkin.com/support...
  • Page 45 Manually Configuring your Router Adding Another Network Segment Wirelessly Connecting a network switch or hub to the Access Point’s RJ45 jack will allow a number of computers connected to the switch access to the rest of the network.
  • Page 46 Setting up a Bridge Between your Router and a Secondary Access Point Bridging your Belkin Router to a secondary Access Point requires that you access the Router’s Advanced Setup Utility and enter the MAC address of the Access Point in the appropriate area. There are also a few other requirements.
  • Page 47 Manually Configuring your Router Check the box that says “Enable ONLY specific Access Points to connect” (1). In the field named “AP1” (3), type in the MAC address of your secondary Access Point. When you have typed in the address, click “Apply Changes”.

  • Page 48: Firewall

    Manually Configuring your Router Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including: • IP Spoofing • Land Attack • Ping of Death (PoD) • Denial of Service (DoS) •...

  • Page 49: Virtual Servers

    Manually Configuring your Router Virtual Servers Virtual servers allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications, through your Router to your internal network. Since your internal computers are protected by a firewall, machines from the Internet cannot get to them because they cannot be “seen”.
  • Page 50 Manually Configuring your Router Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers. Access Control Access control allows users to define the outgoing traffic permitted or denied access through the WAN interface.
  • Page 51 Manually Configuring your Router Click “OK” and then click “Apply Changes” to save your settings.
  • Page 52 Manually Configuring your Router URL Blocking To configure the URL blocking feature, specify the websites (www.somesite. com) and or keywords you want to filter on your network. Click “Apply Changes” to activate the change. To complete this configuration, you will need to create or modify an access rule in the “Client IP filters”...
  • Page 53 Manually Configuring your Router Follow these steps to add a schedule: Click “Add Schedule Rule”. You will see the following screen. To configure the schedule rule, specify the name, comment, start time, and end time that you want to filter on your network. Click “OK”...

  • Page 54: Setting Mac Address Filtering

    Manually Configuring your Router Setting MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access.
  • Page 55 Manually Configuring your Router DMZ (Demilitarized Zone) If you have a client PC that cannot run an Internet application properly from behind the firewall, you can open the client up to unrestricted two-way Internet access. This may be necessary if the NAT feature is causing problems with an application such as a game or video conferencing application.
  • Page 56 Manually Configuring your Router To put a computer in the DMZ, enter the last digits of its IP address in the IP field and select “Enable”. Click “Apply Changes” for the change to take effect. If you are using multiple static WAN IP addresses, it is possible to select which WAN IP address the DMZ host will be directed to.

  • Page 57: Utilities

    Manually Configuring your Router Utilities The “Utilities” screen lets you manage different parameters of the Router and perform certain administrative functions. Restart Router Sometimes it may be necessary to restart or reboot the Router if it begins working improperly. Restarting or rebooting the Router will NOT delete any of your configuration settings.
  • Page 58 Manually Configuring your Router Restore Factory Defaults Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you back up your settings before you restore all of the defaults. Click the “Restore Defaults”...
  • Page 59 Manually Configuring your Router Click “Save”. A window called “File Download” will open. Click “Save”. When the save is complete, you will see the window below. Click “Close”. A window will open that allows you to select the location in which to save the configuration file.

  • Page 60: Restore Previous Settings

    2. Then, click “Open”. Updating Firmware From time to time, Belkin may release new versions of the Router’s firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Router’s firmware to the latest version.
  • Page 61 Manually Configuring your Router Checking for a New Version of Firmware The “Check Firmware” (1) button allows you to instantly check for a new version of firmware. When you click the button, a new browser window will appear informing you that either no new firmware is available or that there is a new version available.
  • Page 62 Manually Configuring your Router Updating the Router’s Firmware In the “Firmware Update” page, click “Browse” (2). A window will open that allows you to select the location of the firmware update file. Browse to the firmware file you downloaded. Select the file by double-clicking on the file name.
  • Page 63 Manually Configuring your Router You will be asked if you are sure you want to continue. Click “OK”. You will see one more message. This message tells you that the Router may not respond for as long as one minute as the firmware is loaded into the Router and the Router is rebooted.
  • Page 64 Manually Configuring your Router Changing the Login Time-Out Setting The login time-out option allows you to set the period of time that you can be logged into the Router’s advanced setup interface. The timer starts when there has been no activity. For example, you have made some changes in the advanced setup interface, then left your computer alone without clicking “Logout”.
  • Page 65 Manually Configuring your Router Enabling Remote Management Before you enable this advanced feature of your Belkin Router, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD Remote management allows you to make changes to your Router’s settings from anywhere on the Internet.
  • Page 66 Enabling/Disabling UPnP UPnP (Universal Plug-and-Play) is yet another advanced feature offered by your Belkin Router. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP- compliant. Some applications require the Router’s firewall to be configured in a specific way to operate properly.
  • Page 67 Manually Configuring your Router Enabling/Disabling Auto Firmware Update This innovation provides the Router with the built-in capability to automatically check for a new version of firmware and alert you that the new firmware is available. When you log into the Router’s Web-Based Advanced User Interface, the Router will perform a check to see if new firmware is available.

  • Page 68: Manually Configuring Network Adapters

    Setting Up your Computers In order for your computer to properly communicate with your Router, you will need to change your computer’s “TCP/IP / Ethernet” settings to “Obtain an IP address automatically / Using DHCP”. This is normally the default setting in most home computers.

  • Page 69: Setting Up Your Computers

    Setting Up your Computers If “Use the following IP address” (2) is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router.
  • Page 70 Setting Up your Computers Manually Configuring Network Adapters in Windows 98SE or Me Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu. Select “TCP/IP -> settings” for your installed network adapter. You will see the following window. If “Specify an IP address”...
  • Page 71 Setting Up your Computers Write down the IP address and subnet mask from the “IP Address” tab (3). Click the “Gateway” tab (2). Write down the gateway address in the chart. Click the “DNS Configuration” tab (1). Write down the DNS address(es) in the chart.
  • Page 72 Setting Up your Computers Manually Configuring Network Adapters in Mac OS up to 9.x In order for your computer to properly communicate with your Router, you will need to change your Mac computer’s TCP/IP settings to DHCP. Pull down the Apple menu. Select “Control Panels” and select “TCP/ IP”.
  • Page 73 Setting Up your Computers If not already set, at “Configure:”, choose “Using DHCP Server”. This will tell the computer to obtain an IP address from the Router. Close the window. If you made any changes, the following window will appear. Click “Save”. Restart the computer.
  • Page 74 Setting Up your Computers Manually Configuring Network Adapters in Mac OS X Click on the “System Preferences” icon. Select “Network” (1) from the “System Preferences” menu. Select “Built-in Ethernet” (2) next to “Show” in the Network menu. Select the “TCP/IP” tab (3). Next to “Configure” (4), you should see “Manually”...
  • Page 75 Setting Up your Computers If “Manually” is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router. If not already selected, select “Using DHCP”...

  • Page 76: Recommended Web Browser Settings

    Setting Up your Computers Recommended Web Browser Settings In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the advanced web-based user interface, then change your browser’s settings to the recommended settings in this section.
  • Page 77 Setting Up your Computers Netscape Navigator 4.0 or Higher Start Netscape. Click on “Edit” then “Preferences”. In the “Preferences” window, click on “Advanced” then select “Proxies”. In the “Proxies” window, select “Direct connection to the Internet”.

  • Page 78: Troubleshooting

    Troubleshooting Problem: The ADSL LED is not on. Solution: Check the connection between the Router and ADSL line. Make sure the cable from the ADSL line is connected to the port on the Router labeled “DSL Line”. Make sure the Router has power. The Power LED of the front panel should be illuminated.
  • Page 79 Look at the lights on your Router. If you’re using a Belkin Router, the lights should be as follows: • The “Power” light should be on. • The “Connected” light should be on, and not blinking.
  • Page 80 Troubleshooting The exact window that opens will vary depending on the model of wireless card you have; however, any of the utilities should have a list of “Available Networks”— those wireless networks it can connect to. Does the name of your wireless network appear in the results? Yes, my network name is listed—go to the troubleshooting solution titled “I can’t connect to the Internet...
  • Page 81 “Broadcast SSID” is enabled. This setting is found on the Router’s wireless “Channel and SSID” configuration page. If you are still unable to access the Internet after completing these steps, please contact Belkin Technical Support. Problem: • My wireless network performance is inconsistent.
  • Page 82 For more assistance, see your wireless card’s user manual. Problem: I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Router or Belkin Access Point. Solution: Log into your Wireless Router or Access Point. Open your web browser and type in the IP address of the Wireless Router or Access Point.
  • Page 83 Troubleshooting Log into your Router by clicking on the “Login” button in the top right-hand corner of the screen. You will be asked to enter your password. If you never set a password, leave the password field blank and click “Submit”. Click the “Wireless”...
  • Page 84 C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key Click “OK”, and then “Apply” to save the settings. If you are NOT using a Belkin Wireless Card, please consult the manufacturer for that card’s user manual.
  • Page 85 You also need to download the latest driver for your Belkin 802.11g Wireless Desktop Network Card or Notebook Network Card from the Belkin support site. Other operating systems are not supported at this time. Microsoft’s patch only supports devices with WPA- enabled drivers such as Belkin 802.11g products.
  • Page 86 Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Card for a home network. Solution: Clients must use the same key that the wireless router or access point uses. For instance if the key is “Smith Family Network Key”...
  • Page 87 Click “OK, then “Apply” to save the settings. Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Card for a business. Solution: Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen. The “Advanced” button will allow you to view and configure more options of your Card.
  • Page 88 Access (WPA) security and I am NOT using a Belkin Wireless Card for a home network. Solution: If you are not using a Belkin Wireless Desktop or Wireless Notebook Network Card that is not equipped with WPA- enabled software, a file from Microsoft called “Windows XP Support Patch for Wireless Protected Access”...
  • Page 89 Troubleshooting Enabling WPA-PSK (no server) Under Windows XP, click “Start > Control Panel > Network Connections”. Right-clicking on the “Wireless Networks” tab will display the following screen. Ensure the “Use Windows to configure my wireless network settings” box is checked. Under the “Wireless Networks”...
  • Page 90 Troubleshooting What’s the difference between 802.11b, 802.11g, 802.11a, and Pre-N? Currently there are four levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation 802.11(x), so named by the IEEE, the board that is responsible for certifying networking standards.
  • Page 91 Troubleshooting Wireless Comparison Chart Speed 11Mbps Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Compatible with 802.11g Depends on interference - typically 100–200 ft. indoors Mature – widely adopted 54Mbps 54Mbps Common household devices such...

  • Page 92: Technical Support Information

    Technical Support Information Belkin Technical Support For latest software updates or if you have any further questions regarding installation of this product, please visit www.belkin.com/networking...

  • Page 93: Appendixes

    DNS is an acronym for Domain Name Server. A Domain Name Server is a server located on the Internet that translates URLs (Universal Resource Links) like www.belkin.com to IP addresses. Many ISPs do not require you to enter this information into the Router. If you are using a static IP connection type, then you may need to enter a specific DNS address and secondary DNS address for your connection to work properly.
  • Page 94 Appendixes Your ISP gave you software such as WinPoET or Enternet300 that you use to connect to the Internet. You have to double-click on a desktop icon other than your browser to get on the Internet. To set the Router to use PPPoE, type in your user name and password in the spaces provided.
  • Page 95 It scans the air for any available network and allows each computer to automatically select a network from the survey. This occurs if the computer’s SSID is set to “ANY”. Your Belkin Router can block this random search for a network. If you disable the “ESSID Broadcast”...
  • Page 96 Appendixes Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers. URL Blocking To configure the URL blocking feature, specify the websites (www.somesite.

  • Page 97: Administrator Password

    Appendixes can leave the public IP to “0.0.0.0”. If you are using multiple public (WAN) IP addresses, it is possible to select which public (WAN) IP address the DMZ host will be directed to. Type in the public (WAN) IP address you wish the DMZ host to direct to, enter the last two digits of the IP address of the DMZ host computer, and click “Apply Changes”.

  • Page 98: Appendix B: Important Factors For Placement And Setup

    To achieve the best wireless network coverage for your “wireless clients” (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters): •...
  • Page 99 Appendixes • In multistory homes, place the wireless router (or access point) on a floor that is as close to the center of the home as possible. This may mean placing the wireless router (or access point) on an upper floor. •...
  • Page 100 For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included in your User Manual. These guidelines should allow you to cover the maximum possible area with your wireless router (or access point).
  • Page 101 Appendixes 5. Secure Connections, VPNs, and AOL Secure connections typically require a user name and password, and are used where security is important. Secure connections include: • Virtual Private Network (VPN) connections, often used to connect remotely to an office network •...

  • Page 102: Appendix C: Internet Connection Setting Table

    Appendixes Appendix C: Internet Connection Setting Table The following table provides references to select and configure Internet connection in setting up your ADSL connection. Many ISPs use different settings depending on the region and equipment they use. You may try the setting for the ISPs in your region. If it does not work, please contact your ISP for your specific setting.
  • Page 103 Appendixes Country Connection Protocol Europe France PPPoE Germany PPPoE Holland 1483 Bridged PPPoA PPPoA PPPoE Belgium PPPoA Italy PPPoE or PPPoA Spain PPPoE or 1483 Bridged Sweden 1483 Bridged PPPoA Asia Australia PPPoE or PPPoA New Zealand PPPoE or PPPoA Singapore PPPoE VPI/VCI...

  • Page 104: Information

    DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, complies with Part 15 of the FCC Rules. Operation is subject to...
  • Page 105 Consult the dealer or an experienced radio/TV technician for help. Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user’s authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 139 &...
  • Page 106 Belkin Corporation Limited Lifetime Product Warranty Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.
  • Page 108 +31 (0) 20 654 7300 +31 (0) 20 654 7349 fax © 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Apple, AirPort, Mac, Mac OS, and AppleTalk are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

This manual is also suitable for:

F5d7633-4

Table of Contents