Related Manuals for Belkin ADSL Modem with Wireless-G Router F5D7632UK4
Summary of Contents for Belkin ADSL Modem with Wireless-G Router F5D7632UK4
-
Page 1: User Manual
ADSL Modem with Wireless G Router Network your computers and Share share your ADSL Internet access Mbps User Manual 802.11g 2.4GHz • Wireless F5D7632uk4... -
Page 2: Table Of Contents
Benefits of a Home Network ......3 Advantages of a Belkin Wireless Network ....3 2 Make Sure You Have the Following . -
Page 3: Introduction
Introduction Thank you for purchasing the Belkin ADSL Modem with Wireless G Router (the Router). In minutes you will be able to share your Internet connection and network your computers with your new Router. The following is a list of features that make your Router an ideal solution for your home or small office network. - Page 4 Introduction Integrated 802.11g Wireless Access Point 802.11g is an exciting new wireless technology that achieves data rates up to 54Mbps, nearly five times faster than 802.11b. Built-In Dynamic Host Configuration Protocol (DHCP) Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes for the easiest possible connection of a network.
-
Page 5: Benefits Of A Home Network
– set up and access printers, computers, and other networking devices from anywhere in your home Easy Expansion – the wide range of Belkin networking products let you expand your network to include devices such as printers and gaming consoles No cabling required –... -
Page 6: Make Sure You Have The Following
Make Sure You Have the Following Package Contents • ADSL Modem with Wireless G Router • RJ11 Telephone Cord - Gray • RJ45 Ethernet Networking Cable — Yellow • USB 1.0 Cable — Blue • ADSL Microfilter* • Power Adapter •... -
Page 7: Knowing Your Router
Knowing your Router The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility. The LED indicators are easily visible on the front of the Router to provide you with information about network activity and status. - Page 8 Knowing your Router Rear Panel The following figure illustrates the rear panel of your Router. Connect the included power supply to this inlet. Using the wrong type of power adapter may cause damage to your Router. The Ethernet ports are RJ45, 10/100 auto-negotiation. The ports are labeled 1 through 4.
- Page 9 Knowing your Router Reset Button The “Reset” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the “Reset” button.
-
Page 10: Connecting Your Router
Connecting your Router Positioning your Router Your wireless connection will be stronger the closer your computer is to your Router. Typical indoor operating range for your wireless devices is between 100 and 200 feet. In the same way, your wireless connection and performance will degrade somewhat as the distance between your Router connected devices increases. -
Page 11: Connecting Your Computers
Connecting your Router Connecting your Computers Power off your computers and networking equipment. Connect your computer to one of the yellow RJ45 ports on the rear of the Router labeled “connections to your computers” by using an Ethernet networking cable (one Ethernet network cable is supplied). -
Page 12: Connecting Your Adsl Line
Connecting your Router Connecting your ADSL Line Connection for the Router to the ADSL line varies by country and region. Typically it involves a microfilter or a microfilter with built-in splitter to allow simultaneous use of ADSL service and telephone service on the same telephone line. - Page 13 Connecting your Router Note: One RJ11 telephone cord is supplied. When inserting an RJ11 plug, be sure the tab on the plug clicks into position to ensure that it is properly seated. If you have a dedicated ADSL service telephone line with an RJ11 wall jack, simply connect a telephone cord from the wall jack to the gray RJ11 port labeled “DSL line”...
-
Page 14: Powering Up Your Router
Connecting your Router Connecting your Router Powering up your Router Connect the supplied power adapter to the Router power-input plug labeled “Power”. Note: For safety and performance reasons, only use the supplied power adapter to prevent damage to the Router. After connecting the power adapter and the power source is turned on, the Router’s power icon on the front panel should... -
Page 15: Usb Driver Installation
Connecting your Router USB Driver Installation Important: If the Router is connected to a computer through an Ethernet port, you can skip this chapter. Insert the CD into your CD-ROM drive. Open up your CD-ROM drive by going into “My Computer”. Double-click on the folder named “Files”. - Page 16 Connecting your Router Connect the USB cable to your Router and PC. Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is powered on. The system will detect the USB driver automatically. When the system detects it, the following dialog box will appear.
-
Page 17: Manually Configuring Your Router
Manually Configuring your Router Understanding the Web-Based User Interface The home page shows you a quick view of the Router’s status and settings. All advanced setup pages can be reached from this page. Using Web-Based Manager Once your host PC is properly configured, start your web browser and type the private IP address of the Router into the URL field: “192.168.2.1”... - Page 18 Manually Configuring your Router (10) Quick-Navigation Links You can go directly to any of the Router’s UI pages by clicking directly on these links. The links are divided into logical categories and grouped by tabs to make finding a particular setting easier to find.
- Page 19 Manually Configuring your Router you can log out of the Router by clicking the “Logout” button. For more information about logging into the Router, see the section called “Logging into the Router”. Internet Status Indicator This indicator is visible in all pages of the Router, showing the connection status of the Router.
-
Page 20: Changing Lan Settings
IP. Examples of a non-routable IP are: 192.168.x.x (where x is anything between 0 and 255) 10.x.x.x (where x is anything between 0 and 255) Subnet Mask There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router. - Page 21 Manually Configuring your Router DHCP Server The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network automatically. The default setting is “On”. The DHCP server can be turned OFF if necessary; however, in order to do so, you must manually set a static IP address for each computer on your network.
-
Page 22: Dhcp Client List
Manually Configuring your Router DHCP Client List You can view a list of the computers, which are connected to your network. You are able to view the IP address of the computer, the host name (name of the computer in your network), and the MAC address of the computer’s network interface card (NIC). - Page 23 Manually Configuring your Router User Name – Enter the ISP assigned user name. Password – Enter your password (assigned by your ISP). VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here (assigned by your ISP). Encapsulation –...
- Page 24 Manually Configuring your Router Setting your ISP Connection Type to Classical IP over ATM (CLIP) IP Address – Enter the WAN IP address provided by your ISP. Subnet Mask – Enter a subnet mask provided by your ISP. Default Gateway – Enter a default gateway IP address.
- Page 25 Manually Configuring your Router VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here (assigned by your ISP). Encapsulation – Select LLC or VC MUX (assigned by your ISP). Advanced From the “Advanced” page, you can create multiple profiles for your WAN connection.
- Page 26 Manually Configuring your Router Setting your ISP Connection Type to PPPoE or PPPoA Enter the PPPoE (Point-to-Point Protocol over Ethernet) or PPPoA information in the provided spaces, and click “Next”. This information is provided by your ISP. Click “Finish” to activate your settings. User name –...
- Page 27 Manually Configuring your Router VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here (assigned by your ISP). Encapsulation – Select LLC or VC MUX (assigned by your ISP). Setting your ISP Connection Type to Classical IP over ATM (CLIP) Enter (CLIP) information in the provided spaces, and click “Next”.
- Page 28 Manually Configuring your Router Primary DNS Server – Enter the primary DNS server’s IP address provided by your ISP. Secondary DNS Server – Enter the secondary DNS server’s IP address provided by your ISP. VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here (assigned by your ISP).
-
Page 29: Wireless
Manually Configuring your Router Name – Select the network device. Destination – The destination is the destination host, subnet address, network address, or default route. The destination for a default route is 0.0.0.0. Netmask – The network mask is used in conjunction with the destination to determine when a route is used. -
Page 30: Channel And Ssid
Manually Configuring your Router Channel and SSID Changing the Wireless Channel There are a number of operating channels you can choose from. In the United States, there are 11 channels. In the United Kingdom and most of Europe, there are 13 channels. In a small number of other countries, there are other channel requirements. - Page 31 Manually Configuring your Router To change the SSID, type in the SSID that you want to use in the SSID field and click “Apply Changes”. The change is immediate. If you make a change to the SSID, your wireless-equipped computers may also need to be reconfigured to connect to your new network name.
- Page 32 Manually Configuring your Router • 54G-LRS – It is not recommended you use this mode unless you have a very specific reason to do so. This mode exists only to solve unique problems that may occur with some 802.11b client adapters and is NOT necessary for interoperability of 802.11g and 802.11b standards.
- Page 33 Microsoft was available for free download. This patch works only with Windows XP. You also need to download the latest driver for your Belkin 802.11g CardBus Card from Belkin’s support site. Other operating systems are not supported at this time.
- Page 34 Manually Configuring your Router There are two types of WPA security: WPA-PSK (no server) and WPA (with server). WPA-PSK uses what is known as a pre-shared key as the security key. A pre-shared key is basically a password that is between eight and 40 characters long.
- Page 35 Manually Configuring your Router Setting WPA (with server) Settings If your network uses a radius server to distribute keys to the clients, use this setting. From the “Security Mode” drop-down menu, select “WPA (with Radius server)”. Enter the IP address of the radius server into the “Server IP” fields. Enter the radius key into the “Shared Secret”...
- Page 36 Manually Configuring your Router MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access.
-
Page 37: Firewall
Manually Configuring your Router Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks. The firewall also masks common ports that are frequently used to attack networks. These ports appear to be “Stealth”, meaning that for all intents and purposes they do not exist to a would-be hacker. - Page 38 Manually Configuring your Router Typical Security – By selecting this option, the Router will reject all inbound traffic from the Internet except remote administration connections but it will allow all outbound traffic to the Internet, except as configured in the “Access Control” screen. Minimum Security –...
- Page 39 Manually Configuring your Router Enter the LAN IP address in the space provided for the “Local Host”. Select the service that you want in the check box and click “OK” to save your settings. Opening ports in your firewall can pose a security risk. You can enable and disable settings very quickly.
- Page 40 Manually Configuring your Router Access Control Access control allows users to define the outgoing traffic permitted, or denied access, through the WAN interface. The default is to permit all outgoing traffic. To configure restrictive access to your computers, do the following: Click “New Entry”...
- Page 41 Manually Configuring your Router You may filter Internet access for local clients based on rules. Each access control rule may be activated at a scheduled time. To configure the access control for a specific time, do the following: From the previous screen, click “New” and you will see the following screen.
- Page 42 Manually Configuring your Router Enter the start time and end time you want to apply the setting and click “OK”. Click “OK” and then click “OK” to save your settings. Web Filtering The web-filtering feature will allow you to specify which websites are not allowed to be viewed from the local computer.
- Page 43 Manually Configuring your Router Schedule Rule You may filter website access for local clients based on rules. Each web filter rule may be activated at a scheduled time. To configure the access control for a specific time, do the following: From the previous screen, click “New”...
- Page 44 Manually Configuring your Router Enter the start time and end time you want to apply the setting and click “OK”. Click “OK” and then click “OK” to save your settings. MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network.
- Page 45 Manually Configuring your Router From the “MAC Filtering Mode” pull-down list, select “Allow” and “Apply Changes” to save your settings. DMZ (Demilitarized Zone) If you have a client PC that cannot run an Internet application properly from behind the firewall, you can open the client up to unrestricted two-way Internet access.
-
Page 46: Utilities
Manually Configuring your Router Security Log As shown in the web page, you can view the system log and configure the system log settings if needed. Utilities The “Utilities” screen lets you manage different parameters of the Router and perform certain administrative functions. Restart Router Clicking the “Restart Router”... - Page 47 Manually Configuring your Router Restore Factory Defaults Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you back up your settings before you restore all of the defaults. Clicking the “Restore Defaults”...
- Page 48 Click “OK” then “OK” again to restore. Firmware Update From time to time, Belkin may release new versions of the Router’s firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Router’s firmware to the latest version.
- Page 49 Manually Configuring your Router Updating the Router’s Firmware In the “Firmware Update” page, click “Browse”. A window will open that allows you to select the location of the firmware update file. Browse to the firmware file you downloaded. Select the file by double-clicking on the file name.
- Page 50 Manually Configuring your Router Allow Incoming ICMP Echo Requests: Choose this box if you want to allow ping or traceroute commands under DOS prompt. Allow Incoming UDP Traceroute Queries: Choose this box if you want to allow UDP traceroute requests. System Settings The “System Settings”...
- Page 51 Enabling/Disabling UPnP UPnP (Universal Plug-and-Play) is yet another advanced feature offered by your Belkin Router. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Router’s firewall to be configured in a specific way to operate...
-
Page 52: Status
Manually Configuring your Router Status Overview This page shows the current status for the ADSL connection. ADSL Line This page shows all information for the ADSL line. - Page 53 Manually Configuring your Router Internet Connection This page displays the connection information for your Router, such as name, VPI/VCI settings, protocol, NAT, WAN IP address, and connection status. Connection Status This page can test the Internet connection from your Router. To begin the test, click “Test”.
- Page 54 Manually Configuring your Router Traffic Counter This table shows the records of data going through the LAN and WAN interface. For each interface, cumulative totals are displayed for “Sent/ Received Packets” and “Sent/Received Bytes”.
-
Page 55: Setting Up Your Computers
Setting Up your Computers In order for your computer to properly communicate with your Router, you will need to change your computer’s “TCP/IP Ethernet” settings to “Obtain an IP address automatically/Using DHCP”. This is normally the default setting in most home computers. You can set up the computer that is connected to the ADSL modem FIRST using these steps. - Page 56 Setting Up your Computers Manually Configuring Network Adapters in Windows 98SE or Me Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu. Select “TCP/IP -> settings” for your installed network adapter. You will see the following window. If “Specify an IP address”...
- Page 57 Setting Up your Computers Set up the computer that is connected to the cable or DSL modem by FIRST using these steps. You can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet.
- Page 58 Setting Up your Computers If not already set, at “Configure:”, choose “Using DHCP Server”. This will tell the computer to obtain an IP address from the Router. Close the window. If you made any changes, the following window will appear. Click “Save”. Restart the computer.
- Page 59 Setting Up your Computers Manually Configuring Network Adapters in Mac OS X Click on the “System Preferences” icon. Select “Network” (1) from the “System Preferences” menu. Select “Built-in Ethernet” (2) next to “Show” in the Network menu.
- Page 60 Setting Up your Computers Select the “TCP/IP” tab (3). Next to “Configure” (4), you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to make sure that “Connect using PPPoE” is NOT selected. If it is, you will need to configure your Router for a PPPoE connection type using your user name and password.
-
Page 61: Recommended Web Browser Settings
Setting Up your Computers Recommended Web Browser Settings In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the advanced web-based user interface, then change your browser’s settings to the recommended settings in this section. - Page 62 Setting Up your Computers Make sure there are no check marks next to any of the displayed options: “Automatically detect settings”, “Use automatic configuration script”, and “Use a proxy server”. Click “OK”. Then click “OK” again in the “Internet Options” page. Netscape Navigator 4.0 or Higher Start Netscape.
-
Page 63: Troubleshooting
Troubleshooting Problem: The ADSL LED is not on. Solution: Check the connection between the Router and ADSL line. Make sure the cable from the ADSL line is connected to the port on the Router labeled “DSL Line”. Make sure the Router has power. The Power LED on the front panel should be illuminated. - Page 64 Solution: If you are unable to connect to the Internet from a wireless computer, please check the following items: Look at the lights on your Router. If you are using a Belkin Router, • The “Power” light should be on.
- Page 65 Troubleshooting Does the name of your wireless network appear in the results? Yes, my network name is listed—go to the troubleshooting solution titled “I can’t connect to the Internet wirelessly, but my network name is listed”. No, my network name is not listed—go to the troubleshooting solution titled “I can’t connect to the Internet wirelessly, and my network name is not listed”.
- Page 66 This setting is found on the Router’s wireless “Channel and SSID” configuration page. If you are still unable to access the Internet after completing these steps, please contact Belkin Technical Support. Problem: My wireless network performance is inconsistent. Data transfer is sometimes slow.
- Page 67 Range Extender/Access Point that can be connected wirelessly to a Belkin 802.11g Wireless Router, without requiring an Ethernet cable or powerline Ethernet adapters. These Belkin products are available at your local retailer, or can be ordered from Belkin directly. For network/range extension information, please visit: www.belkin.
- Page 68 Troubleshooting Problem: I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Router or Belkin Access Point. Solution: Log into your Wireless Router or Access Point. Open your web browser and type in IP address of the Wireless Router or Access Point.
- Page 69 C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key Click “OK”, and then “Apply” to save the settings. If you are NOT using a Belkin Wireless Card, please consult the manufacturer for that card’s user manual.
- Page 70 You also need to download the latest driver for your Belkin Wireless 802.11g Desktop or Notebook Network Card from the Belkin support site. Other operating systems are not supported at this time. Microsoft’s patch only supports devices with WPA-enabled drivers such as Belkin 802.11g products.
- Page 71 Troubleshooting Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Router or Belkin Access Point for a home network. Solution: From the “Security Mode” drop-down menu, select “WPA-PSK (no server)”. For “Encryption Technique”, select “TKIP” or “AES”. This setting will have to be identical on the clients that you set up.
- Page 72 Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Card for a home network. Solution: Clients must use the same key that the wireless router or access point uses. For instance if the key is “Smith Family Network Key” in the wireless router or access point, the clients must also use that same key.
- Page 73 Click “OK, then “Apply” to save the settings. Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security and I am NOT using a Belkin Wireless Card for a home network. Solution: If you are NOT using a Belkin Wireless Desktop or Wireless Notebook Network Card and it is not equipped with WPA-enabled software, a file from Microsoft called “Windows XP Support Patch...
- Page 74 Troubleshooting Supported Operating Systems: • Windows XP Professional • Windows XP Home Edition Enabling WPA-PSK (no server) Under Windows XP, click “Start > Control Panel > Network Connections”. Right-clicking on the “Wireless Networks” tab will display the following screen. Ensure the “Use Windows to configure my wireless network settings”...
- Page 75 Troubleshooting What is the difference between 802.11b, 802.11g, 802.11a, and Pre-N? Currently there are four levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation 802.11(x), so named by the IEEE, the board that is responsible for certifying networking standards.
-
Page 76: Technical Support Information
Technical Support Information Technical Support For latest software updates or if you have any further questions regarding installation of this product, please visit www.belkin.com/networking or contact: Europe: 00 800 223 55 460... -
Page 77: Appendixes
DNS is an acronym for Domain Name Server. A Domain Name Server is a server located on the Internet that translates URLs (Universal Resource Links) like www.belkin.com to IP addresses. Many ISPs do not require you to enter this information into the Router. If you... - Page 78 Appendixes You have to double-click on a desktop icon other than your browser to get on the Internet. To set the Router to use PPPoE, type in your user name and password in the spaces provided. After you have typed in your information, click “Apply Changes”.
- Page 79 This occurs if the computer’s SSID is set to “ANY”. Your Belkin Router can block this random search for a network. If you disable the “ESSID Broadcast” feature, the only way a computer can join your network is by its SSID being set to the specific name of the network (like WLAN).
- Page 80 Appendixes Virtual Servers This function will allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your Router to your internal network. Since your internal computers are protected by a firewall, machines from the Internet cannot get to them because they cannot be “seen”.
-
Page 81: Administrator Password
Appendixes MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access. - Page 82 Appendixes Assuming the time-out is set to 10 minutes, then 10 minutes after you leave, the login session will expire. You will have to log into the Router again to make any more changes. The login time-out option is for security purposes and the default is set to 10 minutes. Note, only one computer can be logged into the Router’s advanced setup interface at a time.
-
Page 83: Appendix B: Important Factors For Placement And Setup
To achieve the best wireless network coverage for your “wireless clients” (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters): •... - Page 84 Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices. For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included in your User Manual.
-
Page 85: Appendix C: Internet Connection Setting Table
These guidelines should allow you to cover the maximum possible area with your wireless router (or access point). Should you need to cover an even wider area, we suggest the Belkin Wireless Range Extender/Access Point. 5. Secure Connections, VPNs, and AOL Secure connections typically require a user name and password, and are used where security is important. - Page 86 Appendixes Country Connection VPI/VCI Encapsulation ISPs Protocol Europe France PPPoE 8/35 Various Germany PPPoE 1/32 T-Online, various Holland 1483 0/35 BBNed, XS4all Bridged 0/32 Versatel DHCP 0/34 Baby XL, Tiscali (start/ Surf/ Family/ Live) PPPoA 8/48 VC MUX KPN, Hetnet, HCCNet, Tiscali (lite/ Basis/Plus)
-
Page 87: Information
Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D7632-4 to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is... - Page 88 Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user’s authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 139 &...
- Page 89 Belkin Corporation Limited Lifetime Product Warranty Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.
- Page 90 +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax © 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Apple, AirPort, Mac, Mac OS, and AppleTalk are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.