Belkin F1PI210ENau User Manual page 12

Advanced Setup Method
USB (Page 80)
• You can plug-in your USB hard drive or memory stick and share
these resources to your home network.
Tools (Page 83)
• Contains options to back up and restore the current
configuration, restore all configuration settings to the factory
defaults, update system firmware, or reset the system each
under its own menu.
Status (Page 85)
• Provides WAN connection type and status, firmware and
hardware version numbers, system IP settings, as well as DHCP,
NAT, and firewall information.
• Displays the number of attached clients, the firmware versions,
the physical MAC address for each media interface, and the
hardware version and serial number.
• Shows the security and DHCP client log.
20
Advanced Setup Method
System
Time Settings
Set the time zone and time server for the VoIP Router. This
information is used for log entries and client access control.
Check "Enable Automatic Time Server Maintenance" to automatically
maintain the VoIP Router's system time by synchronizing with a
public time server over the Internet. Then configure two different time
servers by selecting the options in the Primary Server and Secondary
Server fields.
Password Settings
Use this page to restrict access based on a password. By default, the
password is "admin".
21
1
2
3
4
5
6
7