Belkin F1PI210ENau User Manual page 14

Advanced Setup Method
DNS
Domain Name Servers are used to map a domain name
(e.g. www.somesite.com) to the equivalent numerical IP address
(e.g. 64.147.25.20). Your ISP should provide the IP address of one
or more Domain Name Servers. Enter those addresses on this page.
24
Advanced Setup Method
WAN
Specify the WAN connection parameters provided by your Internet
Service Provider (ISP).
The VoIP Router can be connected to your ISP in one of the following
ways:
• ATM PVC
• Clone MAC
ATM PVC
The VoIP Router uses ATM as its WAN interface. Click on each ATM
VC for WAN configuration.
Parameter Description
Description: Click on the VC to set the values for the connection
VPI/VCI: Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI)
Encapsulation: Specifies how to handle multiple protocols at the ATM
transport layer
• VC-MUX: Point-to-Point Protocol over ATM Virtual Circuit
Multiplexer (null encapsulation) allows only one protocol running
per virtual circuit with less overhead.
25
1
2
3
4
5
6
7