Names And Features Of Parts - Toshiba WR01A - PoE Vandal Resistant Network Dome Camera User Manual

Names and Features of Parts

Mode Setting Switch
LL BLC
ON
OFF
Downloaded from www.Manualslib.com
BLC (Backlight Compensation Switch)
With the switch on, it adjusts
the backlight automatically to
obtain the best possible image.
LL
Sets camera synchronization
to line lock with the switch on.
Available only with AC24V.
PoE/POWER SELECT switch
manuals search engine
Lens Iris ADJ
Counterclockwise: The picture becomes
darker.
Clockwise: The picture becomes
brighter.
"Optimum Value" is at default setting.
Line Lock Phase ADJ
Adjusts the phase of the line lock.
Monitor Out Connector
Connect with the supplied monitor out
harness wire. Used to view the image
when adjusting the position of the
camera.
RESET
When the button is pressed, all the set
values of the network camera are reset
to the default settings (initial stage).
( page.88)
Select the type of power source input. Default
switch is set to ACDC. (Refer to Page15)
5