Names Of Camera Parts (Ik-Wb01A) - Toshiba IK-WB11A Basic User's Manual

Setting up the Network Camera Enviroment (Cont.)
Names of Camera Parts（IK-WB01A）
Front
Side
Holes for wall attachment (→ page 17)
Rear
ALARM OUT
Alarm output terminal
GND
14
Reset button (→ page 39)
・Reset the settings to the defaults by
using a thin, pointed object to press
the button for at least 5 seconds. (The
AC adaptor must be connected)
(The log information is not returned to
the default state. To return the log
information to the default state, delete
the log information in the settings
screen.)
ALARM IN
Alarm input terminal
Lens cover
(Transparent sphere)
Bottom
Built-in microphone
(→ page 10)
DC IN 10V
Power plug input terminal (→page 21)
・Be sure to use the AC adaptor included with the
network camera.
10/100 ETHERNET
Ethernet jack
Lens
(Focal range: 35 cm
to infinity)