INSTALLATION (Cont.)
I Installation to Junction Box with Bracket (Flush Mount
Installation)
Mount camera base with three supplied
screws B. (Shorter screw(M4x10))
Tighten and lock the screws firmly.
12
Downloaded from
www.Manualslib.com
Screws (not supplied)
x4
Screws
x3
manuals search engine
4 6 m m ( 1 .
8 1 in c h )
Junction Box
8 3 . 5 m m
( 3 . 2 9 i n c
Bracket
Note the direction of the
screw mounts on the bracket.
The convex side should face
the camera base.
Mount the top cover (dome cover
assembly) and secure it firmly with
three security screws using the
supplied special hexangular wrench.
Align to this mark.
Unit: mm (inches)
h )
Align the marks.