Ftp By Motion Detection - Toshiba WR01A - PoE Vandal Resistant Network Dome Camera User Manual

Recording Images on FTP Server (Cont.)
IFTP by Motion Detection
You can control the settings to record images for FTP by Motion Detection.
1) Configure the numbers of frames you want to record for
2) Configure the numbers of frames you want to record for
3) Configure Interval(s)
48
Downloaded from www.Manualslib.com
To configure the motion detection, select "Enable" in or "Motion Detect" in the alarm
G
settings (➝ page. 64)
To run the recording, select "Motion Detection" in "Connection to FTP Enable"
G
(➝ page. 43).
Pre-Recording
Possible numbers of frames are as follows:
G
Enter a number in the range of 0 through 30.
Post-Recording
Enter the number between 0 and 1000.
G
NOTE
• Numbers of recorded image frame may decrease depending on networking
conditions and recording cycle
Records 1 image per configured recording cycle (second).
G
Setting ranges are 1 through 10.
NOTE
• Cycle may change depending on Resolution (image size) and networking
conditions.
manuals search engine
.