Names And Features Of Parts - Toshiba IK-WR01A Operation Manual

Names and Features of Parts

Mode Setting Switch
BLC (Backlight Compensation Switch)
LL BLC
With the switch on, it adjusts
ON
the backlight automatically to
obtain the best possible image.
OFF
LL
Sets camera synchronization
to line lock with the switch on.
Available only with AC24V.
Lens Iris ADJ
Counterclockwise: The picture becomes
darker.
Clockwise: The picture becomes
brighter.
"Optimum Value" is at default setting.
Line Lock Phase ADJ
Adjusts the phase of the line lock.
Monitor Out Connector
Connect with the supplied monitor out
harness wire. Used to view the image
when adjusting the position of the
camera.
PoE/POWER SELECT switch
Select the type of power source input. Default
switch is set to ACDC. (Refer to Page15)
RESET
When the button is pressed, all the set
values of the network camera are reset
to the default settings (initial stage).
( page.88)
5