Select "Manually."
The default setting is "Automatically by DHCP."
G
Fill in "IP Address," "Subnet Mask," "Default Gateway,"
"DNS1" and "DNS2."
Important
If you do not know the subnet mask, consult the provider or network system
G
administration support center.
You do not need to enter the default gateway if the network camera will not be
G
accessed from another network. If you do need to enter a default gateway, consult the
network system administration support center.
Click the "Save" button.
The settings are registered.
G
Downloaded from
www.Manualslib.com
manuals search engine
31