Table of Contents
Advertisement
4.
NAMES AND FUNCTIONS
©DC IN 12V terminal
(DDISP button
©MENU UP button
©DATA UP(AWB) button
©DATA DOWN button
©MENU DOWN button
©RGB terminal
© Prism faceplate
(©DISP button
©PAGE button
©MENU UP button
©MENU DOWN button
©DATA UP (AWB) button
©DATA DOWN button
©DC IN 12V terminal
© RGB terminal
The protection cap is attached on the lens mount portion. After removing the
cap, mount the lens. Be careful not to scratch or touch the optical area.
Used when switching the display.
Used when switching to the menu and when selecting the menus.
Select the function to be confirmed or changed on the menu.
Select the function to be confirmed or changed on the menu.
Changes the value of the function selected by the MENU (UP/DOWN) button.
(Also used when using AWB.)
Changes the value of the function selected by the MENU (UP/DOWN) button.
Accept a DC power input (12V).
Used as the connector terminal for RGB output, and SYNC output.
HD and VD signals are input/output. When the random trigger operation is
used, the trigger signal is input and the index signal is output. This terminal
also includes an RS232C format control.
Advertisement
Table of Contents
