IRebooting the network camera
You can restart the network camera.
1) Click "Reboot IP Camera."
A confirmation message appears, asking whether or not the camera should be
rebooted.
2) Click "OK."
IUpdating the Firmware
You can update the firmware on the network camera.
Click "Firmware update."
For details, refer to "Updating the Firmware" (¡ page. 72).
When updating the firmware, the settings are reset. Make sure to save the settings of
the camera on your personal computer before starting update operation.
IClick Export current configurations
You can save the network camera settings on a personal computer.
Click "Export current configurations."
For details, refer to "Saving the Settings on a Personal Computer"
(¡ Page.74)
IImporting the Settings Saved on a Personal Computer
You can import the settings saved on a personal computer to the network camera.
Click "Import new configurations."
For details, refer to "Saving the Settings on a Personal Computer" (¡ page. 75).
Downloaded from
www.Manualslib.com
manuals search engine
59