Table of Contents
Advertisement
System Settings (Cont.)
58
Downloaded from
www.Manualslib.com
GSetting up a format to display date/time
1) Select the "Date-Time Displaying Format" from the pull-down menu.
• yyyy-mm-dd HH:MM:SS (ex. 2004-9-15 14:23:32)
• dd Mmm yyyy HH:MM:SS (ex. 15 Sep 2004 14:23:32)
• mm-dd-yyyy HH:MM:SS (ex. 9-15-2004 14:23:32)
(default: dd Mmm yyyy HH:MM:SS)
2) Click the "Change" button.
GSetting the color of date/time display
1) Select "Text Color" from the pull-down menu.
red/green/blue/white/black (default: green)
2) Click the "Change" button.
GChanging the time using an NTP server setting
1) Mark "NTP" (default: not marked).
2) Enter the host name of NTP server in the "NTP Server" field.
3) Set the "Adjusting Cycle" from the pull-down menu (to specify the intervals to
adjust time) (default: 24 hours).
4) Click the "Adjust" button.
GAdjusting the date and time
1) Unmark "Synchronize with PC's Time."
2) Enter the value in "Date" with numbers and "/" (e.g. 20/9/2004).
3) Enter the value in "Time" with numbers and ":" (e.g. 14:23:32).
4) Click the "Adjust" button.
• When "Synchronize with PC's Time" is marked, you can synchronize the
setting with the time on a personal computer (default: marked).
GSetting the time zone
1) Select "Time Zone" from the pull-down menu.
2) Click the "Adjust" button.
GDaylight Saving setting
1) Select "ON" or "OFF" for the "Daylight Saving" setting (default: OFF).
2) Click the "Adjust" button.
IRestoring the default settings
You can restore the default settings (initial state).
1) Click "Restore factory default configuration."
A confirmation message appears, asking whether or not the current settings
should be restored to the default configuration.
2) Click "OK."
manuals search engine
Advertisement
Table of Contents
