Ribbon Problems; Other Problems - AMT Datasouth Fastmark 4600 PLUS Series User’s guide User Manual

Ribbon Problems

LED/LCD
READY and RIBBON LEDs
LCD Display
Possible Problems
Ribbon out
Ribbon jam
Ribbon sensor
error
Note: If you use direct thermal, set with panel, Windows driver or command.

Other Problems

LED
READY LED
Problems
Serial IO error
Cutter failed
Memory full
Note: After problem is solved, press CANCEL to continue printing
.
Indication
Blinking
RIBBON OUT
Solutions
Supply the ribbon roll
Recover the jam
Replace ribbon sensor
Indication
Blinking
Solutions
Check the baud rate,
format or protocol
between host and printer
 Check the media.
 Check the connection
between cutter and
main board.
 Call for service.
Check graphics and soft
fonts from host. Delete by
application software for
those no longer in use.
56
Remarks
Not applicable to direct
thermal.
Remarks
Not for Centronics
Need to reboot the
system.