AMT Datasouth Fastmark 4600 PLUS Series User’s guide User Manual page 20

4. Lead the ribbon through the print head module. (Figure 4)
5. Attach the edge of the ribbon onto the bare core and wind it a bit onto the
core. Make sure the coating side of the ribbon is face down.
4
Bar Core
6. Insert the core onto the ribbon pick-up spindle. (Figure 5)
5
7. Turn the pick-up spindle to ensure the ribbon is tightly wound.
Print
Head
Module
Ribbon
Pick-up
Ribbon Pick-up
Spindle
Spindle
20