AMT Datasouth Fastmark 4600 PLUS Series User’s guide User Manual page 49

1. Turn off the printer. Plug the power cable into the power socket on the wall,
and then connect the other end of the cable to printer's power socket.
Connect an interface cable (i.e USB, Parallel or Serial) from the printer to the
PC.
2. Turn on the printer. If the printer supports Plug-and-Play, and you have
successfully connected it using a USB cable, then the Windows Add
Hardware Wizard will automatically detect the printer and display a dialog that
allows you to install a driver. Click Cancel and do not install the driver using
the Windows Add Hardware Wizard. Instead use the Seagull Driver
Installation Wizard provided on the CD ROM received with your printer.
3. Utilizing the CD ROM from your printer package, select and start the Seagull
Driver Wizard.
4. On the prompt, Windows Printer Driver, select "I accept..." and click "Next".
49