AMT Datasouth Fastmark 4600 PLUS Series User’s guide User Manual page 13

Basic Printer Features and Parameter Settings , PPLA/PPLB.
NOTE: Features can vary based on printer model. Do not change settings
during printing or communication.
Feature
PRINT MODE Thermal transfer /
Direct thermal
AUTO Mode 1~4
CALIBRATE
MODE
CUT/PEEL -015 ~+.050
OFFSET
TPH VERTICAL -.003~+.003"
OFFSET
RECOVER ENABLED,
PRINT DISABLED
CUTER YES
INSTALLED NO
PEELER YES
INSTALLED NO
READER YES
INSTALLED NO
WIN. CON. LIN. 0~254
BASE SEED 0~4 ips
COUNTING UP
DOWN
DOWN
MEDIA GAP
SENSOR TYPE BLACK BAR
BACKFEED ENABLED
DISABLED
.0~040"
PRESENT
DISTANCE
BASE -028~+028
DARKNESS
BAUD RATE 600 / 1200 / 2400/
(RS232) 4800 / 9600 /
19200 /NONE
Parameter Factory Default
Thermal transfer
Mode 1
0
0
ENABLED
NO
NO
NO
0
0 ips
DOWN
GAP
DISABLED
.87"
0
9600
13
Remarks
Calibrates on demand.
Controls cut and peel
position.
Offset of vertical print
position.
Contents reprint after media
out or ribbon-out.
Only under Windows with
bundled printer driver and
continuous media.
Select for media
characteristics. Once
changed make sure to
calibrate before printing.
Appears only when
BACKFEED enabled.