Printing A Configuration Report - AMT Datasouth Fastmark 4600 PLUS Series User’s guide User Manual

Printing a Configuration Report

To perform a self-test and print a configuration report:
1. Turn off the printer.
2. Press and hold the FEED button while turning on the power.
3. When "SELF-TESTING ..." is displayed on the LCD and the READY
indicator blinks, release the FEED button.
NOTE: Printers with Ethernet will take 20 second for this process, the
PAUSE button must be pressed during that period.
4. The printer prints out a configuration report.
5. When "READY" is displayed on the LCD , the READY indicator stops
blinking but remains illuminated.
6. The following information is printed in the report:
 Font list
 Hardware configuration and status
 Label parameters
 Firmware version
Notes:
After the self-test the printer enters the diagnosis mode (Dump mode). To
continue to normal operation, press CANCEL button to cancel the diagnosis mod
(Dump mode).
42