AMT Datasouth Fastmark 4600 PLUS Series User’s guide User Manual page 33

Pressed during normal operation
Button
FEED The printer will Feed a one label.
The printer will begin blinking the READY LED.
If printing the printer will STOP printing, and the READY
LED will blink.
PAUSE
If pressed a second time the printer will resume normal
operation.
Models will blink the READY LED and display PAUSE on
the LCD display while in the Paused condition.
The printer will Stop printing and delete any further
information in the printer's buffer. The user must realign
the media by pressing the FEED button, following this
CANCEL
function.
Models will blink the READY LED and display CANCEL on
the LCD display while in the Paused condition.
Pressed for Special functions
Button
FEED
Enter into the printer's Setup menu.
PAUSE
See the Front Panel Setup Menu section for more
(RELEASE
information.
BUTTONS)
Function
Function
33